0%

BYD Shark 6 Tips and Tricks: 20 Useful Features Every Owner Should Know

The BYD Shark 6 is one of the most interesting plug-in hybrid utes available in Australia. It combines impressive acceleration, electric driving capability, advanced technology and practical features that make everyday driving more convenient.

However, owning a BYD Shark 6 is quite different from driving a conventional diesel ute. Its hybrid system, battery management settings, regenerative braking and touchscreen controls offer plenty of opportunities to improve the driving experience.

Many owners are familiar with the basics but may not be taking full advantage of everything their vehicle can do.

In this guide, we'll explore 20 practical BYD Shark 6 tips and tricks, including battery management, charging strategies, hidden convenience features, off-road settings and ways to reduce petrol consumption.

Whether you've just purchased your Shark 6 or have been driving one for several months, these tips will help you get more from your ute.

What you will find:

1. Understand the Difference Between EV and HEV Modes

One of the most important things to learn about the BYD Shark 6 is how its two main powertrain modes work.

EV Mode: Best for Everyday Driving

EV mode prioritises electricity stored in the high-voltage battery.

This makes it particularly useful for short trips, urban commuting and driving through residential areas.

When conditions allow, the Shark 6 can operate without starting its petrol engine.

For Australian owners who commute relatively short distances and have access to home charging, EV mode can significantly reduce petrol consumption.

However, EV mode doesn't guarantee that the engine will remain off. The vehicle may switch to hybrid operation during hard acceleration, high power demand, low battery charge or extreme temperatures.

HEV Mode: Better for Longer Journeys

HEV mode allows the petrol engine and electric motors to work together automatically.

It's particularly useful during highway travel, longer journeys and situations where battery energy needs to be conserved.

The important trick is understanding that HEV mode doesn't mean the petrol engine runs continuously.

When sufficient battery energy is available and power demand is low, the Shark 6 may still operate electrically.

Our recommendation is to use EV mode for short journeys when charging is convenient, while allowing HEV mode to manage energy during longer trips.

2. Learn How to Adjust the Battery SOC Setting

One of the most useful BYD Shark 6 settings is the State of Charge, commonly called SOC.

SOC represents the percentage of energy stored in the high-voltage battery.

The Shark 6 allows drivers to select a target SOC, influencing how much battery energy the hybrid system attempts to retain.

You can find this function in the vehicle's Energy settings, although the exact touchscreen layout may vary depending on software version.

AUTO vs SAVE Mode

The Shark 6 also offers different energy management priorities.

AUTO mode prioritises overall efficiency, allowing the vehicle to balance petrol and electricity consumption.

SAVE mode prioritises retaining battery energy near the selected SOC target.

For example, if you're driving towards a campsite and want electricity available for appliances when you arrive, selecting a higher target SOC in SAVE mode can help preserve battery energy.

On the other hand, if you're returning home and plan to recharge immediately, a lower target SOC may allow you to use more electricity before reaching your destination.

Remember that forcing the petrol engine to maintain a high SOC may increase fuel consumption.

The best setting depends on your journey rather than one universal percentage.

3. Charge Your BYD Shark 6 Regularly

The Shark 6 uses BYD's lithium iron phosphate Blade Battery technology.

The Australian 2026 range features a battery with approximately 29.6 kWh of capacity.

This battery supports everyday electric driving and can be charged from an external power source.

Why Regular Charging Matters

A common mistake is treating the Shark 6 like a conventional hybrid and rarely plugging it in.

Although the petrol engine can maintain battery energy, external charging is generally the more economical way to enjoy its plug-in hybrid advantages.

Charging regularly allows owners to use electricity for short journeys rather than relying heavily on petrol.

For drivers with access to affordable electricity, this can translate into meaningful running-cost savings.

Should You Charge to 100%?

BYD's Shark 6 battery guidance recommends regularly completing an AC charge to 100%, typically at least once a week, for optimal battery performance.

This is different from the charging recommendations commonly associated with some other lithium-ion battery chemistries.

Avoid intentionally running the battery extremely low during ordinary driving, and follow the charging and battery calibration instructions for your particular model.

4. Take Advantage of Home Charging

Home charging is one of the biggest advantages of owning a plug-in hybrid ute.

The BYD Shark 6 supports AC charging at up to approximately 7 kW, depending on the charger and available electrical supply.

A compatible home wallbox can recharge the battery considerably faster than a standard domestic power point.

Charging Overnight

For many Australian households, overnight charging is particularly convenient.

You can return home, connect the charging cable and start the following morning with a charged battery.

If your electricity retailer offers cheaper off-peak rates, scheduling charging during those periods may reduce running costs.

The actual savings depend on your electricity tariff, charging losses and driving habits.

It's worth checking the vehicle's charging schedule settings and the capabilities of your home charger.

Always use properly installed, compliant charging equipment rather than unsuitable extension leads or adapters.

5. Use DC Fast Charging Strategically

Unlike many plug-in hybrids, the BYD Shark 6 supports DC fast charging.

Its maximum DC charging capability is approximately 55 kW.

This can be useful when travelling between Australian cities or when you want to replenish the battery during a longer stop.

However, a larger public charging station advertising 150 kW or 350 kW won't make the Shark 6 charge at those speeds.

The vehicle controls the maximum power it can accept.

Charging performance also varies according to battery temperature, current charge level and charger conditions.

The Charging Trick

When using a public DC charger, consider whether the electricity added is worth the charging fee and waiting time.

Some public fast chargers charge substantially more per kWh than home electricity.

For certain highway journeys, allowing the hybrid system to operate normally may be more convenient than stopping frequently to recharge.

The best strategy is to compare the cost of electricity with the petrol you would otherwise use.

6. Experiment With Regenerative Braking Settings

Regenerative braking allows the electric motors to recover some energy when the Shark 6 slows down.

Instead of wasting all that energy as heat through the conventional braking system, some of it can be returned to the battery.

The Shark 6 provides Standard and High regenerative braking settings.

Standard Regeneration

Standard mode delivers a gentler deceleration sensation when the accelerator is released.

It can feel more natural for drivers transitioning from conventional petrol or diesel vehicles.

High Regeneration

High mode increases the energy recovery and deceleration effect when lifting off the accelerator.

This can be useful in stop-start traffic or on journeys involving repeated slowing.

However, stronger regeneration doesn't automatically mean better overall efficiency in every situation.

Smooth driving, anticipation and avoiding unnecessary acceleration are usually more important.

Also, the Shark 6 isn't a full one-pedal-driving vehicle. Drivers must remain prepared to use the brake pedal.

7. Use ECO Mode to Reduce Energy Consumption

The BYD Shark 6 offers driving settings that change how the vehicle responds to driver inputs.

ECO mode is particularly useful when maximum acceleration isn't necessary.

It encourages smoother power delivery and can make maintaining an efficient driving style easier.

For everyday commuting around Sydney, Melbourne, Brisbane or Perth, ECO mode is a sensible starting point.

When Should You Use Sport Mode?

Sport mode is better suited to situations where more immediate accelerator response is desirable.

However, the additional responsiveness can encourage greater energy consumption.

The Shark 6 already provides strong acceleration without needing to remain in Sport mode all the time.

For most ordinary journeys, ECO or the standard driving setting is sufficient.

8. Discover the Touchscreen Shortcuts

The BYD Shark 6 infotainment system includes several useful controls that can save time once you become familiar with them.

On compatible software versions, swiping down from the top of the touchscreen opens a quick-settings menu.

This can provide access to frequently used functions without navigating through multiple menus.

Customise Your Most-Used Settings

Spend some time exploring the available shortcuts and arranging frequently used controls where the system permits.

Useful settings may include screen brightness, connectivity, climate functions and vehicle controls.

The Premium model also features a large rotating touchscreen, allowing supported content to be displayed in different orientations.

Not every app supports every screen orientation, so the experience may vary.

Learning the infotainment shortcuts is one of the easiest ways to make daily Shark 6 ownership more convenient.

9. Try the BYD Voice Assistant

The Shark 6 includes a voice assistant that can help drivers control compatible vehicle functions.

Instead of reaching for the touchscreen, you can activate the assistant and request supported actions.

For example, depending on the software version and enabled features, you may be able to ask the vehicle to adjust the cabin temperature or change audio settings.

Useful Voice Commands

Try natural requests such as:

  • "Hi BYD, set the temperature to 22 degrees."
  • "Hi BYD, turn on the air conditioning."
  • "Hi BYD, increase the volume."
  • "Hi BYD, navigate home."
  • "Hi BYD, open the driver's window."

Command availability and wording can change with software updates and regional settings.

The voice assistant is especially valuable because it can reduce the need to interact with the touchscreen while driving.

10. Set Up the BYD Smartphone App

Another feature worth exploring is the official BYD smartphone app.

Once your vehicle has been correctly linked to your account, the app can provide convenient access to supported remote functions.

Depending on the model, connectivity and software configuration, these may include viewing battery information, checking vehicle status, locating the vehicle and remotely controlling climate functions.

Pre-Cool Your Shark 6 Before Driving

This is particularly useful during hot Australian summers.

If your vehicle supports remote climate activation, you can start cooling the cabin shortly before entering.

The result is a more comfortable interior without waiting for the air conditioning to cool a heat-soaked cabin after departure.

When the vehicle is connected to external charging, pre-conditioning may also help reduce the amount of battery energy required after setting off.

Check the app's available functions, as they can differ between model years and software releases.

11. Explore the Digital Key Features

The Shark 6 supports modern access options beyond the traditional key fob, including compatible digital key functionality.

A digital key can allow supported smartphones to operate as a vehicle access credential once properly configured.

This is particularly convenient when you don't want to carry a conventional key.

However, digital key features depend on smartphone compatibility, software and correct activation.

Before relying on your phone exclusively, make sure the function works consistently and keep an alternative vehicle key available.

12. Use the 360-Degree Camera When Parking

The BYD Shark 6 is a large dual-cab ute, making tight parking spaces more challenging than those in smaller passenger cars.

Its surround-view camera system can be particularly helpful when manoeuvring.

Drivers can use the available camera views to better judge the vehicle's position relative to kerbs, obstacles and parking lines.

Parking Trick for Tight Spaces

Before entering a narrow parking area, activate the appropriate camera view at a safe speed.

Use the visual information to help understand the vehicle's position.

This can be especially helpful when parking beside high kerbs or navigating crowded shopping-centre car parks.

This content may interest you!Mazda CX-5 tips every owner should know

However, camera images can distort distance and may not show every obstacle.

Always use mirrors and direct observation alongside the cameras.

13. Learn the Off-Road Terrain Modes

One of the Shark 6's most interesting features is its electronically controlled all-wheel-drive system.

Unlike traditional four-wheel-drive utes with mechanical transfer cases, the Shark 6 uses electric drive components to distribute power between its axles.

It also offers terrain-specific driving modes.

Sand Mode

Sand mode is designed to adjust the vehicle's behaviour for sandy terrain.

This can be useful on suitable Australian beach tracks and other approved off-road areas.

Before driving on sand, check the appropriate tyre pressure for your equipment, load and conditions.

Lower pressures can improve flotation in some situations, but tyre pressures should be adjusted carefully and restored before returning to sealed roads.

Mud Mode

Mud mode changes powertrain and traction behaviour to suit slippery, muddy surfaces.

It can help manage traction, although it doesn't eliminate the risk of becoming stuck.

Snow and Mountain Modes

Snow mode is intended for slippery, low-grip conditions.

Mountain mode can help adapt vehicle behaviour for suitable challenging terrain.

The exact settings and their effects depend on software and model specification.

Important: The Shark 6's terrain modes do not make it equivalent to every traditional low-range 4WD. Drivers should understand its ground clearance, tyres, approach and departure angles, traction capabilities and recovery limitations before tackling difficult tracks.

14. Use Hill Descent Control on Steep Terrain

The BYD Shark 6 includes hill descent control, a useful feature when travelling down steep surfaces at low speed.

The system helps manage vehicle speed during a descent, reducing the amount of manual braking required.

This can make controlled downhill driving easier on suitable off-road terrain.

However, hill descent control cannot overcome insufficient tyre traction.

On loose gravel, mud or wet surfaces, maintaining an appropriate speed and choosing a safe route remain essential.

Before tackling a steep descent, learn how to activate the system and understand the operating conditions specified in the owner's handbook.

15. Make the Most of Vehicle-to-Load Technology

Vehicle-to-Load, commonly called V2L, is one of the most useful features available on the BYD Shark 6.

It allows the vehicle to supply electricity to compatible external appliances.

This makes it particularly attractive for Australian camping enthusiasts, tradies and outdoor adventurers.

Practical V2L Uses

You can use suitable power outlets or a compatible V2L adapter to power equipment such as portable refrigerators, camping lights, laptops, battery chargers and other appliances within the relevant electrical limits.

One particularly useful application is supplying electricity to camping equipment in remote locations.

Important V2L Precautions

Always check the wattage rating of the individual outlet and the total power limits.

Avoid connecting appliances that exceed those ratings.

Make sure sufficient battery energy remains for driving, and remember that the petrol engine may start automatically in some discharging situations.

Never operate the system in a closed garage or poorly ventilated area where exhaust gases could accumulate.

Also, avoid using exposed electrical outlets during thunderstorms or vehicle washing.

16. Understand the Shark 6's Towing Limits

Not every BYD Shark 6 sold in Australia has the same towing capacity.

This is particularly important following the introduction of additional variants.

BYD Shark 6 VariantMaximum Braked Towing Capacity
Dynamic Cab Chassis2,500 kg
Premium2,500 kg
Performance3,500 kg

The Performance variant uses a more powerful 2.0-litre turbocharged hybrid powertrain, while Dynamic and Premium models use a 1.5-litre turbocharged hybrid system.

Towing Tips

When towing, consider the combined weight of the trailer, passengers, accessories and cargo.

Towball download also affects the vehicle's available payload.

Never assume that a vehicle capable of towing a particular trailer can simultaneously carry its maximum advertised payload.

Additionally, towing can substantially increase petrol consumption and reduce available electric driving range.

Plan charging, fuel stops and battery management accordingly.

17. Don't Ignore the Engine Break-In Period

This is one of the most overlooked BYD Shark 6 ownership tips.

Even though the Shark 6 can drive on electricity, it still contains a petrol engine that requires appropriate running-in.

BYD's Shark 6 guidance recommends a break-in period covering approximately the first 2,000 kilometres.

During this period, owners are advised to use smooth driving, avoid aggressive acceleration and allow sufficient operation in HEV-ECO mode.

The guidance also specifies that engine-involved HEV driving should account for at least 50% of driving during the break-in period.

Avoid towing during the initial 2,000 kilometres, and follow the handbook's recommendations concerning speed variation and braking.

This is particularly important for owners who might otherwise drive almost exclusively in EV mode during their first few months.

18. Check Tyre Pressures Regularly

Correct tyre pressure is important for energy efficiency, comfort, tyre wear and vehicle handling.

Underinflated tyres can increase rolling resistance and energy consumption.

Overinflated tyres may reduce comfort and affect grip.

For best results, check tyre pressures when the tyres are cold and use the values specified on the vehicle's tyre placard.

Loaded vs Unloaded Driving

Tyre pressure requirements may differ when carrying heavy loads or towing.

Don't rely on one pressure setting for every situation.

Also remember that aftermarket tyres, wheels or off-road modifications may require additional guidance from a qualified tyre specialist.

19. Keep the Software Updated

The Shark 6 uses software to manage many functions, including infotainment, vehicle controls and aspects of its hybrid system.

Software updates may introduce usability improvements, bug fixes and other changes.

Some updates may be available over the air, while others may require dealership assistance.

Before Installing an Update

Ensure the vehicle has sufficient battery charge and is parked safely.

Follow all instructions displayed by the vehicle.

Avoid interrupting an update unless specifically instructed.

After installation, review your preferred settings, as certain options or menu locations may have changed.

It's also worth checking whether any new functions have become available.

20. Develop a Driving Strategy That Matches Your Routine

The biggest trick to owning a BYD Shark 6 efficiently isn't a hidden menu or special button.

It's learning how to use its hybrid system according to your driving habits.

A driver commuting 30 kilometres per day will have very different energy requirements from someone travelling hundreds of kilometres along Australian highways.

Example: Short Daily Commute

If your daily journey is relatively short, start with a charged battery and prioritise electric driving where appropriate.

Recharge at home when convenient.

This allows the Shark 6 to take advantage of its plug-in hybrid system.

Example: Long Highway Journey

For an extended highway journey, HEV mode can help balance petrol and electrical energy.

If you expect to finish the trip somewhere with affordable charging, using more battery energy before arrival may improve overall efficiency.

Example: Weekend Camping Trip

Before departing, fully charge the battery and plan how much energy you'll need for driving and V2L appliances.

Use the target SOC function if you want to preserve energy for the campsite.

Allow additional battery reserve for unexpected detours or difficult driving conditions.

The ideal settings can change depending on terrain, temperature and load.

BYD Shark 6 Quick Settings Guide

The following table provides a practical starting point for common driving situations.

Driving SituationSuggested Strategy
Short urban commuteEV mode when appropriate
Long highway journeyHEV with AUTO energy management
Need to conserve batteryHEV with SAVE and an appropriate SOC target
Everyday efficient drivingECO mode and smooth acceleration
Stop-start trafficExperiment with regenerative braking
Camping with appliancesPlan a higher battery reserve and V2L usage
Sandy conditionsSelect Sand mode when suitable
Steep off-road descentUse hill descent control when appropriate
Overnight home chargingSchedule charging around convenient electricity rates
First 2,000 kmFollow HEV-ECO engine break-in guidance

These are general suggestions rather than universal settings. Always prioritise the vehicle handbook and road conditions.

Common BYD Shark 6 Mistakes to Avoid

Although the Shark 6 is designed to be relatively easy to operate, there are several mistakes that can reduce efficiency or create unnecessary problems.

Using Sport Mode All the Time

Sport mode is enjoyable, but aggressive driving increases energy demand.

For ordinary commuting, smoother accelerator inputs will generally deliver better efficiency.

Assuming the Petrol Engine Never Needs Maintenance

A plug-in hybrid still requires engine oil, filters and other scheduled servicing.

Even if much of your driving is electric, engine maintenance remains important.

Believing the Advertised Fuel Economy Applies to Every Journey

The Shark 6's official fuel consumption figures depend heavily on battery charge and test conditions.

For example, the Dynamic and Premium models have been rated at approximately 2.0 L/100 km in charge-sustaining and charge-depleting test conditions represented by the manufacturer's higher-SOC combined figure, while the published low-SOC figure is approximately 7.9 L/100 km.

These are different test conditions, not guaranteed real-world results.

If you rarely recharge, your average petrol consumption may be substantially higher than the headline figure.

Forgetting About Payload

The weight of accessories, passengers, luggage and equipment contributes to the total load.

Always check your specific Shark 6 variant's payload and vehicle mass limits before fitting heavy accessories or carrying substantial loads.

Relying Too Heavily on Driver Assistance

Adaptive cruise control, parking cameras and other assistance systems are useful, but they don't replace attentive driving.

Keep your hands ready, monitor the road and understand each system's limitations.

Frequently Asked Questions About BYD Shark 6 Tips and Tricks

1. What are the best hidden features of the BYD Shark 6?

Some of the most useful features include adjustable battery SOC targets, AUTO and SAVE energy management, regenerative braking settings, voice commands, digital key functionality, surround-view cameras and Vehicle-to-Load power.

Many owners also benefit from learning the touchscreen shortcuts and smartphone app features.

2. What is the best SOC setting for the BYD Shark 6?

There isn't one ideal SOC setting for every driver.

A lower target can be useful when you intend to use battery energy before reaching a charging destination.

A higher target can be useful when you need to preserve electrical energy for camping, demanding driving or other planned activities.

Using SAVE mode to maintain a high SOC can increase petrol consumption.

3. How can I improve BYD Shark 6 fuel economy?

The most effective strategies are charging regularly, using EV mode for suitable shorter journeys, accelerating smoothly, keeping tyres correctly inflated and avoiding unnecessary loads.

Planning your trip around available charging opportunities can also help.

4. Can the BYD Shark 6 power appliances while camping?

Yes. The Shark 6 supports Vehicle-to-Load functionality, allowing compatible appliances to receive electricity through approved outlets or a suitable V2L adapter.

Always check power limits, keep sufficient battery reserve and follow the electrical safety instructions.

5. Should I drive my BYD Shark 6 in EV or HEV mode?

EV mode is particularly suitable for shorter journeys when adequate battery energy is available.

HEV mode is generally better suited to longer trips or situations where the vehicle needs to balance battery energy and petrol usage.

The best choice depends on distance, terrain, battery charge and access to charging.

Final Thoughts: Getting the Most Out of Your BYD Shark 6

The BYD Shark 6 offers considerably more functionality than a conventional ute, and understanding its technology can make ownership more enjoyable.

From adjusting SOC targets and choosing the right hybrid driving mode to using regenerative braking and V2L power, there are plenty of ways to improve convenience and efficiency.

For Australian owners, we believe the most valuable BYD Shark 6 tips and tricks involve three things: charging regularly, understanding how energy management works and configuring the vehicle to suit individual driving requirements.

There's no single setting that works perfectly for every commute, road trip or off-road adventure.

By experimenting with the available features and following the manufacturer's operating guidance, you can take full advantage of what makes this plug-in hybrid ute different.

Ultimately, the Shark 6 rewards owners who learn to use both sides of its powertrain: the quiet efficiency of electric driving and the flexibility of its petrol-electric hybrid system.

This content may interest you!Hidden features in the Mazda CX-5

Leave a Reply

Your email address will not be published. Required fields are marked *

Your score: Useful

Go up