Chery Tiggo 4 Weight: Complete Guide to Petrol and Hybrid Models in Australia

The Chery Tiggo 4 has become an attractive option for Australian drivers looking for an affordable compact SUV with modern technology, practical dimensions and reasonable running costs. However, before buying one, it's worth understanding something that doesn't always receive much attention: how much does the Chery Tiggo 4 weigh?
Vehicle weight affects more than most drivers realise. It can influence acceleration, fuel consumption, braking performance, handling, tyre wear and how much luggage or passenger weight the vehicle can safely carry.
The answer also depends on whether you're considering the conventional petrol-powered Tiggo 4 or the newer Tiggo 4 Hybrid. Although both models belong to the same compact SUV family, their powertrains and weight specifications are different.
For Australian buyers, the 2026 Chery Tiggo 4 petrol has a tare weight of 1,404 kg, while the Chery Tiggo 4 Hybrid has a tare weight of 1,494 kg.
That makes the hybrid approximately 90 kg heavier when comparing the manufacturer-published tare figures.
In this guide, we'll explain the weight specifications of both versions, the differences between kerb weight and gross vehicle mass, and how these figures affect everyday driving in Australia.
- How Much Does the Chery Tiggo 4 Weigh?
- Chery Tiggo 4 Kerb Weight Explained
- Chery Tiggo 4 Petrol vs Hybrid Weight
- Chery Tiggo 4 Gross Vehicle Mass (GVM)
- Chery Tiggo 4 Payload Capacity
- Chery Tiggo 4 Urban vs Ultimate Weight
- How Does Chery Tiggo 4 Weight Affect Fuel Consumption?
- Does Chery Tiggo 4 Weight Affect Handling?
- Chery Tiggo 4 Weight and Tyre Pressure
- Chery Tiggo 4 Weight and Towing
- Is the Chery Tiggo 4 a Heavy SUV?
- How to Check Your Chery Tiggo 4's Exact Weight
- Frequently Asked Questions About Chery Tiggo 4 Weight
- Conclusion: Understanding Chery Tiggo 4 Weight in Australia
How Much Does the Chery Tiggo 4 Weigh?
The Chery Tiggo 4 weighs between 1,404 kg and 1,494 kg in tare mass, depending on the powertrain offered in Australia.
The petrol model is lighter, while the hybrid carries additional electrical components, including its traction battery and electric motor.
Chery Tiggo 4 Weight Specifications Australia
The following table compares the manufacturer's published specifications for the 2026 petrol and hybrid models.
| Weight specification | Tiggo 4 Petrol | Tiggo 4 Hybrid |
|---|---|---|
| Tare mass | 1,404 kg | 1,494 kg |
| Gross Vehicle Mass (GVM) | 1,830 kg | 1,905 kg |
| Difference between GVM and tare | 426 kg | 411 kg |
| Engine | 1.5L turbo petrol | 1.5L petrol hybrid |
| Transmission | CVT | Dedicated Hybrid Transmission |
| Drivetrain | Front-wheel drive | Front-wheel drive |
| Fuel tank capacity | 51 litres | 51 litres |
| Seating capacity | 5 | 5 |
The difference between GVM and tare mass is shown for comparison purposes. It is not the same as the vehicle's actual payload allowance with a full tank of fuel.
These figures apply to the Australian MY26 specifications. Equipment changes and different model years may affect actual vehicle weight.
Chery Tiggo 4 Kerb Weight Explained
Kerb weight is one of the most useful specifications when comparing vehicles because it describes how heavy a vehicle is when it's ready to drive without passengers or luggage.
In Australia, kerb mass generally includes:
- The vehicle's standard equipment.
- Engine oil, coolant and other operating fluids.
- A full fuel tank.
- Factory-installed equipment included in the measured specification.
It excludes occupants and cargo.
What Is the Kerb Weight of the Chery Tiggo 4 Petrol?
Australian vehicle specification listings give the 2026 Chery Tiggo 4 petrol a kerb weight of approximately 1,435 kg.
This is slightly higher than the manufacturer's published tare mass of 1,404 kg because the two measurements use different fuel quantities.
The petrol model has a 51-litre fuel tank, meaning the amount of petrol present during a vehicle weighing makes a noticeable difference.
For practical comparisons with other small SUVs, 1,435 kg is a useful kerb-weight reference for the petrol-powered Tiggo 4.
What Is the Kerb Weight of the Chery Tiggo 4 Hybrid?
Chery's Australian MY26 hybrid specification sheet publishes a tare mass of 1,494 kg, but does not separately specify kerb mass.
For this reason, we recommend using 1,494 kg as the confirmed manufacturer-published tare figure, rather than treating it as an exact full-fuel kerb weight.
The hybrid's full-tank weight will differ from its tare weight, and the exact kerb mass should be checked against the relevant vehicle specification.
Chery Tiggo 4 Petrol vs Hybrid Weight
One of the most interesting differences between the two versions is that the hybrid weighs more despite offering better official fuel efficiency.
The additional 90 kg of tare mass mainly reflects the extra equipment required for electrification.
Why Is the Chery Tiggo 4 Hybrid Heavier?
A conventional petrol-powered Tiggo 4 relies on its internal combustion engine and CVT transmission to deliver power to the front wheels.
The hybrid introduces additional components, including:
- An electric traction motor.
- A high-voltage battery pack.
- Power electronics and control systems.
- A dedicated hybrid transmission.
- Additional electrical wiring and associated equipment.
These components increase the vehicle's overall mass, although the hybrid system can reduce petrol consumption during everyday driving.
Interestingly, the hybrid's increased weight does not necessarily mean that it will feel slower. Electric motors provide strong torque from low speeds, which can improve responsiveness during urban acceleration.
This content may interest you!
Chery Tiggo 4 Service Cost Australia: Complete 2026 Servicing and Maintenance GuideDoes the Extra Hybrid Weight Affect Performance?
Weight is one factor that influences how quickly a vehicle accelerates, but engine and motor output are equally important.
The Australian Tiggo 4 petrol uses a 1.5-litre turbocharged engine producing 108 kW and 210 Nm.
The hybrid combines a 1.5-litre petrol engine with an electric motor, which has a published maximum net output of 150 kW and 310 Nm.
These electric-motor figures should not be confused with the hybrid system's total combined output.
In everyday driving, the additional electric assistance helps the hybrid overcome some of its weight disadvantage, particularly when moving away from traffic lights or accelerating at lower speeds.
Chery Tiggo 4 Gross Vehicle Mass (GVM)
Gross Vehicle Mass, commonly abbreviated as GVM, represents the maximum permitted total weight of a vehicle when loaded.
Unlike tare or kerb weight, GVM includes the combined weight of the vehicle, passengers, luggage, accessories and other loads carried by the vehicle.
The Australian specifications are:
| Model | Maximum GVM |
|---|---|
| Tiggo 4 Petrol | 1,830 kg |
| Tiggo 4 Hybrid | 1,905 kg |
The hybrid has a 75 kg higher GVM than the petrol version.
However, this doesn't automatically mean that the hybrid can carry more passengers or luggage. Its heavier powertrain uses part of the additional allowance.
Why Is GVM Important?
Imagine you're travelling with four passengers, several suitcases and a full tank of petrol.
Even if everything fits inside the cabin and boot, the vehicle may still exceed its permitted weight.
Driving above the manufacturer's GVM can cause several problems:
- Longer braking distances.
- Additional pressure on suspension components.
- Increased tyre loads.
- Reduced stability during emergency manoeuvres.
- Potential legal and insurance complications.
For this reason, understanding the Chery Tiggo 4's GVM is particularly important for families and drivers who regularly travel with substantial luggage.
Chery Tiggo 4 Payload Capacity
Payload refers to how much additional weight a vehicle can carry beyond its unladen, ready-to-drive weight.
This includes passengers, luggage, accessories and other loads.
For the Australian 2026 Tiggo 4 petrol, vehicle specification listings indicate a payload of approximately 395 kg, based on a 1,435 kg kerb mass and 1,830 kg GVM.
For the hybrid, the published GVM is 1,905 kg, but the precise usable payload depends on the applicable kerb weight and vehicle configuration.
How Much Weight Can You Put in a Chery Tiggo 4?
Let's consider a practical example using the petrol Tiggo 4's approximately 395 kg payload allowance.
| Item | Example weight |
|---|---|
| Driver | 80 kg |
| Front passenger | 70 kg |
| Rear passenger 1 | 65 kg |
| Rear passenger 2 | 45 kg |
| Luggage | 60 kg |
| Additional belongings | 20 kg |
| Total additional load | 340 kg |
In this example, the vehicle carries approximately 340 kg of additional weight.
That would leave around 55 kg of the stated payload allowance, assuming the vehicle is otherwise in its standard configuration.
However, aftermarket accessories, fitted equipment and other load-related factors may reduce the remaining allowance.
It's also important to remember that the Tiggo 4's five-seat configuration doesn't guarantee that it can carry five adults with heavy luggage without exceeding its GVM.
Does a Roof Rack Count Towards Payload?
Yes. A roof rack, roof box and anything placed inside it all contribute to the vehicle's total weight.
Roof-mounted accessories also have separate loading restrictions.
For example, even if the vehicle has sufficient remaining payload, you must still respect the roof load limit specified for your exact model and roof-rack system.
Because weight carried above the vehicle raises its centre of gravity, excessive roof loading can also affect stability during cornering.
This content may interest you!
How to Turn Off Lane Assist on Chery Tiggo 4: Complete GuideChery Tiggo 4 Urban vs Ultimate Weight
Australian buyers can choose between Urban and Ultimate equipment grades.
Both are available within the petrol and hybrid Tiggo 4 ranges, although equipment varies.
Chery Tiggo 4 Petrol Urban Weight
The petrol Urban uses the same 1.5-litre turbocharged engine and front-wheel-drive configuration as the Ultimate.
Chery's Australian MY26 specification sheet lists a tare mass of 1,404 kg for the petrol range without publishing separate tare figures for each grade.
The Urban comes with 17-inch alloy wheels and 215/60 R17 tyres.
Chery Tiggo 4 Petrol Ultimate Weight
The petrol Ultimate features additional convenience and technology equipment, along with 18-inch alloy wheels and 215/55 R18 tyres.
Differences in wheels, interior equipment and other features can influence actual weight.
However, the manufacturer does not provide a separate MY26 tare figure for the Ultimate in the published specification sheet.
We therefore shouldn't assume a particular weight difference between Urban and Ultimate without checking the exact vehicle configuration.
Chery Tiggo 4 Hybrid Urban vs Ultimate Weight
The hybrid Urban and Ultimate versions share the same basic powertrain.
Both use a 1.5-litre hybrid system, dedicated hybrid transmission and front-wheel drive.
One equipment difference is that the Hybrid Urban has a temporary tyre repair kit, while the Hybrid Ultimate has a temporary spare wheel.
This may affect the individual vehicle's weight, although Chery publishes a shared tare mass of 1,494 kg rather than separate figures for the two hybrid grades.
How Does Chery Tiggo 4 Weight Affect Fuel Consumption?
Vehicle weight can influence fuel consumption because a heavier vehicle generally requires more energy to accelerate and climb hills.
However, it is not the only factor that determines efficiency.
Engine design, transmission efficiency, aerodynamics, rolling resistance and driving conditions all play significant roles.
Chery Tiggo 4 Petrol Fuel Consumption
The Australian petrol Tiggo 4 has an official combined fuel consumption rating of:
7.4 L/100 km
This figure is based on standardised laboratory testing rather than a guarantee of actual fuel consumption.
Urban traffic, air-conditioning use, hills and vehicle loading can all increase real-world consumption.
Chery Tiggo 4 Hybrid Fuel Consumption
Despite being heavier, the hybrid achieves a lower official combined consumption figure:
5.4 L/100 km
This represents a difference of 2.0 litres per 100 kilometres compared with the petrol model.
Official combined fuel consumption
0 L/100 km2 L/100 km4 L/100 km6 L/100 km8 L/100 kmPetrolHybrid
Australian MY26 official combined-cycle figures; lower is better.
The hybrid can achieve better efficiency because its electrical system allows it to recover braking energy and use electric assistance instead of relying exclusively on the petrol engine.
This content may interest you!
Chery Tiggo 4 Engine Specs Australia: Petrol and Hybrid Performance ExplainedDoes Carrying More Weight Increase Fuel Consumption?
Generally, yes.
Carrying additional passengers or luggage requires more energy during acceleration and uphill driving.
For example, a Tiggo 4 carrying only a driver will usually need less energy to accelerate than the same vehicle carrying four adults and a boot full of luggage.
The effect may be less noticeable during steady highway cruising, where aerodynamic drag becomes a major contributor to energy use.
Does Chery Tiggo 4 Weight Affect Handling?
Weight influences how a vehicle responds to steering inputs, braking and changes in direction.
However, the distribution of that weight is just as important as the total mass.
City Driving
The Tiggo 4's compact dimensions and relatively moderate weight make it suitable for urban environments.
In city traffic, drivers may appreciate its manageable size when parking, turning or manoeuvring through narrow streets.
The petrol version's lighter tare mass may offer some advantages, although steering calibration and suspension tuning can have a greater influence on how the vehicle feels.
Highway Driving
At highway speeds, vehicle stability depends on several factors, including suspension geometry, tyres, aerodynamic design and weight distribution.
A heavier vehicle isn't automatically more stable.
The Tiggo 4 is designed primarily as a compact passenger SUV rather than a heavy-duty touring vehicle.
When travelling with passengers and luggage, respecting the vehicle's load limits helps maintain predictable handling and braking performance.
Braking Performance
A fully loaded vehicle carries more kinetic energy at the same speed than a lightly loaded one.
This means the braking system must manage additional energy during deceleration.
The Tiggo 4 includes electronic braking and stability technologies, but they cannot eliminate the physical effects of additional vehicle mass.
Maintaining suitable following distances is particularly important when travelling at maximum permissible load.
Chery Tiggo 4 Weight and Tyre Pressure
Tyre pressure is directly related to vehicle loading.
A tyre must support the weight placed on it while maintaining an appropriate contact patch with the road.
Incorrect tyre pressure may contribute to:
- Uneven tyre wear.
- Increased rolling resistance.
- Reduced steering precision.
- Higher tyre operating temperatures.
- Increased risk of tyre damage.
The recommended tyre pressure for a lightly loaded Tiggo 4 may differ from the pressure specified for a fully loaded vehicle.
Always check the tyre-pressure placard on your particular vehicle, especially before carrying several passengers or going on a long road trip.
Chery Tiggo 4 Weight and Towing
Vehicle weight is also relevant when deciding whether a car is suitable for towing.
However, tare mass and GVM do not establish towing capacity.
Before attaching a trailer, Australian drivers should check the manufacturer-approved limits for:
- Braked towing capacity.
- Unbraked towing capacity.
- Maximum towball download.
- Gross Combination Mass, if specified.
- Towbar and coupling ratings.
Towball download adds weight to the vehicle and must be considered when calculating the remaining allowable load.
It's important not to assume that a vehicle capable of carrying a certain amount of luggage can support an equivalent trailer load.
This content may interest you!
Subaru Crosstrek Weight: Kerb Weight, Payload and GVM ExplainedFor the Tiggo 4, always use the approved towing specifications for the exact Australian model and powertrain rather than relying on figures published for overseas versions.
Is the Chery Tiggo 4 a Heavy SUV?
Compared with larger medium and seven-seat SUVs, the Tiggo 4 sits towards the lighter end of the market.
Its 1,404 kg petrol tare mass is relatively modest for a modern compact SUV equipped with an automatic transmission, safety technology and infotainment features.
The 1,494 kg hybrid tare mass is higher, but this is understandable considering its additional electrical equipment.
Advantages of a Relatively Lightweight SUV
A vehicle with a lower mass can offer several potential advantages when other engineering factors are comparable.
These include reduced energy requirements during acceleration, less weight for the brakes to manage and potentially lower tyre and suspension loads.
Are There Any Disadvantages?
A lighter SUV doesn't automatically provide a better driving experience.
Larger or heavier vehicles may offer more cabin space, higher load ratings or different levels of refinement.
The Tiggo 4's main appeal is its balance of compact dimensions, equipment and everyday usability rather than maximum load-carrying capacity.
For most urban commuters and small households, its weight specifications should be suitable for normal daily use.
However, buyers who regularly carry five adults, extensive luggage or heavy equipment should pay close attention to payload limits.
How to Check Your Chery Tiggo 4's Exact Weight
If you're buying a new or used Tiggo 4 in Australia, there are several ways to confirm the relevant specifications.
1. Check the Manufacturer's Specifications
Start with the specification sheet corresponding to your model year, powertrain and equipment grade.
The petrol and hybrid versions have different weights, so selecting the correct version is essential.
2. Check the Vehicle Identification and Compliance Information
Your vehicle's identification and compliance information can help establish its approved configuration and applicable mass limits.
Some information may also be available through the manufacturer's documentation or the Australian Register of Approved Vehicles.
3. Consult the Owner's Manual
The owner's manual may provide additional information about loading restrictions, tyre pressures and the limits that apply when carrying passengers or equipment.
4. Use a Public Weighbridge
If you need to know your car's actual weight with accessories, fuel and personal belongings, a certified weighbridge can provide a more accurate measurement.
This is especially useful when preparing for a lengthy trip or checking whether additional accessories have reduced your available payload.
Frequently Asked Questions About Chery Tiggo 4 Weight
1. How much does the Chery Tiggo 4 weigh in Australia?
The Australian MY26 Chery Tiggo 4 petrol has a manufacturer-published tare weight of 1,404 kg, while the Tiggo 4 Hybrid has a tare weight of 1,494 kg. The petrol model also has a listed kerb weight of approximately 1,435 kg.
2. Is the Chery Tiggo 4 Hybrid heavier than the petrol version?
Yes. The hybrid has a tare mass approximately 90 kg higher than the petrol model. This difference is largely associated with its electric motor, battery and additional hybrid components.
3. What is the maximum weight of the Chery Tiggo 4?
The petrol Tiggo 4 has a Gross Vehicle Mass of 1,830 kg, while the hybrid has a GVM of 1,905 kg. These figures represent the maximum permitted loaded vehicle mass, including passengers, luggage and accessories.
4. How much weight can a Chery Tiggo 4 carry?
The 2026 petrol Tiggo 4 has a listed payload of approximately 395 kg. This allowance includes passengers, luggage and other added loads. The hybrid's exact payload should be checked against its applicable kerb weight and approved GVM.
5. Does the Chery Tiggo 4's weight affect fuel economy?
Yes. A heavier vehicle generally requires more energy during acceleration and hill climbing. However, the hybrid's electrified powertrain helps it achieve an official combined fuel consumption of 5.4 L/100 km, compared with 7.4 L/100 km for the petrol model, despite its higher tare mass.
Conclusion: Understanding Chery Tiggo 4 Weight in Australia
The Chery Tiggo 4 is a relatively lightweight compact SUV designed to balance everyday practicality, efficiency and comfort.
For Australian buyers, the most important figures are the 1,404 kg tare mass of the petrol Tiggo 4 and the 1,494 kg tare mass of the Tiggo 4 Hybrid.
The hybrid weighs approximately 90 kg more but compensates with significantly better official fuel consumption and electric assistance.
This content may interest you!
Chery Tiggo 4 Fuel Consumption Australia: Petrol vs Hybrid and Real-World EconomyMeanwhile, the petrol version provides a lighter alternative with a straightforward turbocharged powertrain and a listed payload of approximately 395 kg.
Ultimately, understanding the Chery Tiggo 4's weight isn't just about comparing numbers. It helps us make informed decisions about carrying passengers, planning road trips, managing fuel consumption and staying within the manufacturer's approved loading limits.
For most Australian drivers, both versions offer a practical combination of manageable vehicle weight and compact SUV versatility. The important thing is choosing the powertrain that best matches your driving habits and checking the exact weight limits before carrying heavy loads.

Leave a Reply