Hyundai i30 Wiper Blade Sizes by Year (Australia)

Choosing the correct Hyundai i30 wiper blades size is essential for maintaining clear visibility while driving. Whether we're travelling through heavy rain, dealing with dusty Australian roads, or preparing our vehicle for routine maintenance, correctly sized windscreen wipers make a significant difference.

However, not every Hyundai i30 uses the same wiper blade dimensions. The correct measurements depend on the vehicle's generation, model year, and body style.

For example, the first-generation Hyundai i30 FD uses different front wiper sizes from the second-generation GD and third-generation PD models. The Hyundai i30 Sedan also has its own specifications.

In this comprehensive guide, we'll explore Hyundai i30 wiper blade sizes from 2007 to 2026, including front and rear measurements, replacement procedures, compatible blade types, and maintenance recommendations.

We'll also explain how to identify the correct blades, avoid common purchasing mistakes, and determine when replacement is necessary.

Hyundai i30 Wiper Blades Size Chart

If we're looking for replacement windscreen wipers, the following chart provides a useful starting point for Australian Hyundai i30 models.

Important: These are commonly listed aftermarket replacement sizes, not a guarantee of compatibility for every vehicle. Model transitions, body styles, and replacement wiper arms can affect fitment. For the standard CN7 i30 Sedan, Australian parts catalogues sometimes list different front blade combinations, including 26"/16" and 24"/18". Always check the existing blades, connector type, or vehicle-specific fitment information before purchasing.

For most third-generation Hyundai i30 PD hatchbacks, the common configuration is:

• Driver-side wiper: 26 inches (650 mm)
• Passenger-side wiper: 16 inches (400 mm)
• Rear wiper: 12 inches (300 mm)

Now, let's examine each Hyundai i30 generation in more detail.

Hyundai i30 FD Wiper Blade Size (2007–2012)

The first-generation Hyundai i30, identified by the FD chassis code, arrived in Australia in 2007.

This generation became popular thanks to its practical hatchback design, efficient engines, and competitive pricing.

It was offered in hatchback and wagon configurations.

Front Wiper Blade Sizes

The Hyundai i30 FD generally uses:

• Driver side: 24 inches (600 mm)
• Passenger side: 18 inches (450 mm)

These dimensions are commonly listed for Australian models manufactured between 2007 and 2012.

They apply to many variants, although we should verify compatibility before installing replacement blades.

Rear Wiper Blade Size

The rear wiper typically measures 12 inches (300 mm).

Rear wiper connectors can differ from front connectors, so we should purchase a blade designed specifically for the vehicle.

Which Years Use These Sizes?

The FD measurements generally apply to:

• Hyundai i30 2007
• Hyundai i30 2008
• Hyundai i30 2009
• Hyundai i30 2010
• Hyundai i30 2011
• Hyundai i30 2012 FD models

Because 2012 was a transition year, we should confirm whether our vehicle belongs to the FD or GD generation.

Hyundai i30 GD Wiper Blade Size (2012–2017)

The second-generation Hyundai i30 GD introduced a more modern exterior design and revised windscreen configuration.

As a result, its front wiper blade dimensions differ from those of the original FD.

Hyundai i30 GD Front Wiper Sizes

Most GD hatchbacks use:

• Driver side: 26 inches (650 mm)
• Passenger side: 14 inches (350 mm)

Compared with the earlier model, the driver's blade is longer and the passenger-side blade is shorter.

This configuration helps provide effective windscreen coverage without interference between the blades.

Hyundai i30 GD Rear Wiper Size

The commonly specified rear blade measures 13 inches (325 mm).

We should remember that rear blade attachment mechanisms may differ between manufacturers.

Even if a replacement blade has the correct length, it must also connect securely to the wiper arm.

Hyundai i30 GD Years

These measurements generally apply to GD models manufactured during the following years:

• 2012
• 2013
• 2014
• 2015
• 2016
• 2017

The exact generation matters more than the registration year, particularly for vehicles produced near the changeover to the PD.

Hyundai i30 PD Wiper Blade Size (2017–2026)

The Hyundai i30 PD represents the third generation of the popular hatchback.

Introduced in Australia in 2017, it features revised exterior styling, updated technology, and a different front windscreen wiper configuration from its predecessor.

Hyundai i30 PD Front Wiper Sizes

The most commonly listed sizes are:

• Driver side: 26 inches (650 mm)
• Passenger side: 16 inches (400 mm)

This means the driver's blade remains the same nominal length as the GD generation, while the passenger-side blade increases from 14 to 16 inches.

Hyundai i30 PD Rear Wiper Size

The rear wiper typically measures 12 inches (300 mm).

However, we should always verify the connector because rear wiper assemblies are not universally interchangeable.

Hyundai i30 PD Model Compatibility

The 26-inch and 16-inch front combination is commonly specified for PD hatchbacks across several Australian variants, including:

• Hyundai i30 Active
• Hyundai i30 Elite
• Hyundai i30 Premium
• Hyundai i30 N Line
• Hyundai i30 N hatchback

Equipment and fitment can vary, so checking the specific vehicle remains important.

If we're replacing the windscreen wipers on a 2018, 2019, 2020, 2021, or later PD hatchback, this is usually the first size combination to investigate.

Hyundai i30 Sedan Wiper Blade Size

The Hyundai i30 Sedan differs considerably from the hatchback.

The CN7 sedan uses a different body and platform, meaning replacement parts should not automatically be selected from hatchback listings.

Some Australian aftermarket catalogues specify 26-inch and 16-inch front blades for standard CN7 sedan models.

Other catalogues specify 24-inch and 18-inch blades.

This difference makes it particularly important to confirm the exact vehicle specifications.

How to Confirm Hyundai i30 Sedan Wiper Sizes

We recommend checking three details:

1. The existing blade lengths.
2. The wiper arm attachment system.
3. The fitment specification for the exact model and VIN.

If our existing blades are original and functioning correctly, measuring them can provide a helpful reference.

For maximum certainty, a Hyundai parts department can confirm the intended fitment using the vehicle's identification number.

Does the Hyundai i30 Sedan Have a Rear Wiper?

No. Conventional i30 Sedan models do not have a rear windscreen wiper.

Therefore, replacement normally involves the driver-side and passenger-side front blades only.

Hyundai i30 Clutch Replacement Cost Australia (2026)

Hyundai i30 N and N Line Wiper Blade Sizes

The Hyundai i30 N and N Line are popular among Australian drivers who want a sportier version of the i30.

However, it's important to distinguish between the hatchback, fastback, and sedan versions.

Hyundai i30 N Hatchback

The PD-based i30 N hatchback commonly uses:

These sizes are generally consistent with the regular PD hatchback.

Hyundai i30 N Fastback

The PD-based i30 N Fastback typically shares the same front blade measurements.

However, unlike the hatchback, the Fastback does not feature a conventional rear wiper.

Hyundai i30 N Sedan

The CN7-based i30 N Sedan is a different vehicle.

Australian replacement listings commonly specify:

• Driver side: 24 inches (600 mm)
• Passenger side: 18 inches (450 mm)

We should avoid purchasing hatchback wiper kits without first confirming the sedan's specifications.

Hyundai i30 Rear Wiper Blade Sizes Explained

The rear windscreen wiper is particularly useful on hatchback and wagon models.

During wet weather, road spray and dirt can quickly accumulate on the rear window, reducing visibility when reversing or checking traffic behind us.

Rear Wiper Size by Generation

These are typical aftermarket fitment measurements. Wagon and special-version connectors should be checked separately.

Can We Use a Universal Rear Wiper?

Sometimes, but compatibility is not guaranteed.

Many rear wipers use specially designed connectors that attach differently from conventional front wiper blades.

We should always check whether the replacement blade is specifically compatible with our Hyundai i30 generation.

How to Measure Hyundai i30 Wiper Blades

If we're unsure about the correct replacement size, measuring the existing blades is a useful first step.

Step 1: Identify the Wiper Position

Determine which blade we're measuring.

On Australian right-hand-drive Hyundai i30 models, the driver-side wiper is positioned on the right side of the vehicle.

The driver's and passenger's blades usually have different lengths.

Step 2: Measure the Existing Blade

Use a tape measure to determine the approximate overall length of the blade assembly.

Measure from one end of the blade to the other.

Don't measure the metal wiper arm.

Step 3: Compare the Measurement

Most replacement blades use standard nominal lengths.

These metric figures are common catalogue labels rather than exact conversions from inches.

Step 4: Check the Connector

After measuring the blade, inspect its attachment mechanism.

We should confirm that the replacement blade includes the correct adaptor or mounting system.

The correct length alone does not guarantee compatibility.

Best Types of Wiper Blades for the Hyundai i30

Choosing the correct size is important, but we should also consider the blade design.

There are three main types of automotive windscreen wipers.

Conventional Wiper Blades

Conventional wipers use a metal framework that supports the rubber wiping element.

They're commonly found on older vehicles and are generally inexpensive.

Advantages:

• Affordable replacement cost
• Wide availability
• Simple construction
• Suitable for many older cars

However, exposed metal frames may collect dirt and can be less aerodynamic than newer designs.

Flat or Beam Wiper Blades

Beam blades feature a low-profile design without the traditional exposed metal framework.

They use a flexible structure that distributes pressure along the wiping edge.

Advantages:

• Modern aerodynamic design
• Consistent windscreen contact when correctly fitted
• Reduced wind lift
• Clean appearance

For many modern Hyundai i30 models, a high-quality vehicle-specific beam blade is an excellent option.

Hybrid Wiper Blades

Hybrid blades combine features of conventional and beam-style construction.

They often incorporate a supporting frame enclosed within an aerodynamic cover.

Their performance depends on the design and quality of the product.

We should prioritise compatibility, durability, and wiping performance rather than assuming that one construction type is always superior.

Silicone vs Rubber Hyundai i30 Wipers

Another important consideration is the material used for the wiping element.

Rubber Wiper Blades

Rubber blades remain a popular option.

They are widely available, relatively affordable, and capable of providing excellent performance when properly maintained.

However, prolonged exposure to sunlight, heat, and pollution can cause the material to deteriorate.

Silicone Wiper Blades

Silicone blades are often marketed as having greater durability and resistance to environmental conditions.

Some products also leave a water-repellent coating on the windscreen.

However, product quality varies considerably.

Hyundai i30 Insurance Cost Australia: 2026 Guide

A well-made rubber wiper may outperform a lower-quality silicone alternative.

For that reason, we recommend choosing a reputable, correctly fitting blade rather than focusing exclusively on the material.

How to Replace Hyundai i30 Wiper Blades

Replacing Hyundai i30 wiper blades is generally a simple maintenance procedure.

In many cases, we can complete the replacement without specialised tools.

However, some newer models require the wipers to be moved into a service position before lifting the arms.

Step 1: Park and Prepare the Vehicle

Park on a level surface and switch off the vehicle.

If the wipers rest beneath the rear edge of the bonnet, do not force the arms upwards.

Some Hyundai i30 PD models use a service-position procedure involving the wiper control after switching off the ignition.

The exact sequence should be confirmed in the owner's manual.

Step 2: Lift the Wiper Arm

Once the arms are accessible, carefully lift the wiper arm away from the windscreen.

Place a folded towel beneath the arm to protect the glass.

This is important because a metal wiper arm can damage the windscreen if it snaps back unexpectedly.

Step 3: Remove the Old Blade

Locate the blade's release mechanism.

Depending on the connector, we may need to press a locking tab, open a clip, or rotate the blade before sliding it off.

Avoid excessive force.

If the blade doesn't release easily, consult the connector instructions.

Step 4: Install the Replacement Blade

Select the correct replacement size.

Align the new blade with the attachment mechanism and secure it according to the manufacturer's instructions.

Make sure it locks firmly into place.

Gently check the connection before lowering the arm.

Step 5: Replace the Other Blade

Repeat the procedure on the passenger side.

Remember that the blades may have different lengths.

For example, a Hyundai i30 PD hatchback typically uses a 26-inch driver-side blade and a 16-inch passenger-side blade.

Step 6: Test the Wipers

After installing both blades, carefully lower the arms onto the windscreen.

Return the wipers from their service position if required.

Activate the windscreen washer and test the wipers.

Check for:

• Smooth movement
• Consistent contact with the glass
• No unusual noises
• No interference between blades
• No contact with surrounding trim

If the blades don't operate properly, stop and inspect the installation.

How to Replace the Hyundai i30 Rear Wiper

Replacing the rear wiper is often straightforward, although the attachment varies by model.

First, carefully lift the rear wiper arm as permitted by its design.

Next, release the old blade using the appropriate connector mechanism.

Remove the blade without twisting or forcing the arm.

Install the new rear blade and check that the connector locks securely.

Finally, lower the arm gently and test the rear wiper using washer fluid.

If the replacement doesn't fit securely, verify the blade's compatibility rather than modifying the connector.

How Often Should Hyundai i30 Wiper Blades Be Replaced?

A practical replacement interval is approximately every 6 to 12 months, depending on usage, environmental exposure, and blade condition.

Australian driving conditions can accelerate wiper deterioration.

Common contributing factors include:

• Strong ultraviolet radiation
• High summer temperatures
• Road dust
• Heavy rainfall
• Tree sap
• Airborne pollution
• Infrequent windscreen cleaning

Even if we don't drive frequently, the rubber can deteriorate through prolonged exposure to sunlight.

Therefore, we should inspect the blades regularly instead of relying entirely on a fixed replacement schedule.

Signs Your Hyundai i30 Wipers Need Replacing

Worn wiper blades can produce several noticeable symptoms.

Streaks on the Windscreen

If the blades leave streaks or thin lines of water, the rubber may be worn or contaminated.

Cleaning the blades may help temporarily.

If streaking continues, replacement may be necessary.

Squeaking Noises

Squeaking can result from hardened rubber, dirty glass, or excessive friction.

If the noise continues after cleaning, inspect the blades for wear.

Skipping or Juddering

Wipers that jump across the windscreen may have damaged rubber, poor contact, or incorrect installation.

The problem can also involve the wiper arm.

Hyundai i30 Tyre Size Guide: All Models and Years

Unwiped Areas

If parts of the windscreen remain wet after the blades pass over them, the blades may be too short or unable to maintain proper contact.

Visible Rubber Damage

Cracks, splits, or detached rubber sections indicate that the blade should be replaced.

We shouldn't continue using visibly damaged wipers.

What Happens if Hyundai i30 Wiper Blades Are the Wrong Size?

Installing incorrectly sized wiper blades can reduce visibility and potentially interfere with normal wiper operation.

Wiper Blades That Are Too Long

Oversized blades may cause:

• Contact between the front wipers
• Interference with windscreen seals
• Uneven pressure
• Excessive noise
• Increased stress on wiper components

Longer blades do not automatically provide better cleaning performance.

Wiper Blades That Are Too Short

Undersized blades may leave larger sections of the windscreen uncleared.

This can be particularly problematic during heavy rainfall.

The driver's field of vision should remain as clear as possible, making correct blade sizing an important safety consideration.

How to Make Hyundai i30 Wiper Blades Last Longer

Regular maintenance can improve wiping performance and may extend blade life.

Clean the Blades Regularly

Dust and road grime accumulate along the wiping edge.

We can gently clean the rubber using a soft cloth and water or a suitable mild cleaning solution.

Avoid harsh chemicals that could damage the rubber.

Wash the Windscreen

A dirty windscreen increases friction and can accelerate blade wear.

Regularly removing insects, grease, and other contaminants helps maintain smooth operation.

Use Suitable Washer Fluid

Automotive windscreen washer fluid can help remove dirt and improve cleaning performance.

Use a product compatible with the vehicle's washer system.

Avoid Using Wipers on Dry Glass

Operating wipers on a dry, dusty windscreen can increase friction.

If the glass is dirty, use washer fluid or clean it before activating the wipers.

Protect the Vehicle From Excessive Sunlight

Parking under cover when possible can help limit prolonged exposure to UV radiation and high temperatures.

Although we can't eliminate normal ageing, reducing environmental stress may improve blade durability.

Hyundai i30 Wiper Blade Replacement Cost in Australia

Replacement costs vary depending on blade quality, manufacturer, and whether we purchase individual blades or a complete set.

Generally, we can choose between budget universal blades, mid-range aftermarket products, premium beam blades, and genuine Hyundai replacements.

Budget Wiper Blades

Basic aftermarket blades are often the least expensive option.

They may be suitable for older Hyundai i30 models, provided their dimensions and connectors are compatible.

Premium Wiper Blades

Premium products may offer more advanced rubber compounds, aerodynamic designs, or improved construction quality.

However, higher prices don't always guarantee better results.

We should compare fitment, product reputation, and durability.

Genuine Hyundai Wipers

Genuine Hyundai parts can provide a straightforward fitment option when identified using the correct VIN or original part number.

They may cost more than some aftermarket alternatives.

Before purchasing, check whether the quoted price includes a complete blade assembly or only a replacement rubber insert.

Where to Buy Hyundai i30 Wiper Blades in Australia

Hyundai i30 windscreen wipers are widely available through Australian automotive retailers and parts suppliers.

Common options include:

• Repco
• Supercheap Auto
• Autobarn
• Hyundai dealerships
• Specialist automotive parts stores
• Online wiper blade retailers

When ordering online, we should confirm the vehicle's model year, generation, and body style.

It's also important to check whether the product includes one blade, both front blades, or a complete front-and-rear set.

For the CN7 sedan, we recommend checking the specific fitment information carefully because replacement catalogues can differ.

Genuine Hyundai vs Aftermarket Wiper Blades

Many drivers wonder whether genuine Hyundai blades are necessary.

The answer depends on our budget, preferences, and vehicle requirements.

Genuine Hyundai Wiper Blades

Genuine components offer vehicle-specific fitment when ordered using the correct part information.

They can be particularly convenient for drivers who prefer original-equipment replacement parts.

Aftermarket Wiper Blades

Aftermarket products provide a wider choice of prices, materials, and designs.

Well-made aftermarket blades can offer excellent wiping performance.

However, correct compatibility remains essential.

Even if the blade lengths match, an unsuitable connector can prevent installation.

Ultimately, we should choose a product that fits securely and performs consistently.

Can We Replace Only the Wiper Rubber?

Some Hyundai i30 wiper assemblies support replacement rubber inserts.

This can be an economical alternative when the blade's supporting structure remains in good condition.

However, not all modern beam blades are designed for removable inserts.

Hyundai i30 Fuel Tank Capacity: Complete Guide

Before purchasing replacement rubber, confirm that the existing blade assembly supports this procedure.

If the blade frame is bent, damaged, or loose, replacing the complete assembly is generally more appropriate.

Hyundai i30 Wiper Blades Not Working Properly

Sometimes, replacing the wiper blades doesn't resolve the issue.

In these cases, we should investigate other possible causes.

Wipers Leave Streaks After Replacement

First, clean the windscreen thoroughly.

Then confirm that the blades are installed correctly.

If the problem continues, check the wiper arm for damage or uneven pressure.

Wipers Make Noise After Replacement

New blades may squeak if the windscreen is dirty or the connector isn't seated properly.

Incorrect blade dimensions can also contribute to noise.

We should inspect the installation and confirm compatibility.

Windscreen Wipers Don't Move

If the wipers don't operate at all, the problem may involve the motor, fuse, wiring, or linkage.

Replacing the blades will not repair these electrical or mechanical faults.

Consult the owner's manual and seek professional diagnosis when necessary.

Rear Wiper Doesn't Work

A faulty rear wiper may result from a damaged motor, wiring issue, or seized mechanism.

If the rear blade moves normally but doesn't clear the glass, replacing the blade may solve the problem.

If it doesn't move at all, further diagnosis is required.

Common Hyundai i30 Wiper Blade Buying Mistakes

Avoiding a few common mistakes can save us time and unnecessary expense.

Buying Based Only on Registration Year

Two vehicles registered in the same year can belong to different generations.

For example, a 2017 Hyundai i30 may be a GD or PD model.

Always verify the generation.

Assuming All i30 Models Use the Same Blades

The FD, GD, PD, and CN7 models have different fitment requirements.

A universal listing that simply states "Hyundai i30" may not provide enough information.

Ignoring the Connector

Blade length is only part of the specification.

The attachment mechanism must match the existing wiper arm.

Forgetting the Rear Wiper

When replacing the front blades on a hatchback, we should also inspect the rear wiper.

The rear blade can deteriorate even when it is used infrequently.

Purchasing the Wrong Body Style

The hatchback, wagon, fastback, and sedan may use different blade configurations.

Identifying the exact body style helps prevent compatibility problems.

Frequently Asked Questions

1. What Size Wiper Blades Does a Hyundai i30 Take?

The correct size depends on the generation. The Hyundai i30 FD generally uses 24-inch and 18-inch front blades. The GD typically uses 26-inch and 14-inch blades, while the PD hatchback commonly requires 26-inch and 16-inch blades.

The rear wiper size also varies depending on the generation.

2. What Size Wiper Blades Does a 2018 Hyundai i30 Need?

A 2018 Hyundai i30 PD hatchback generally uses a 26-inch (650 mm) driver-side blade and a 16-inch (400 mm) passenger-side blade.

The rear wiper typically measures 12 inches (300 mm).

Always verify the body style and connector before purchasing.

3. What Size Wiper Blades Does a 2015 Hyundai i30 Use?

A 2015 Hyundai i30 GD hatchback commonly uses a 26-inch (650 mm) driver-side wiper and a 14-inch (350 mm) passenger-side wiper.

The rear blade is typically 13 inches (325 mm).

These are common replacement specifications for Australian GD hatchbacks.

4. Can I Use 26-Inch Wiper Blades on Both Sides?

No. Most Hyundai i30 models require different driver-side and passenger-side blade lengths.

Installing two 26-inch blades can cause interference or uneven windscreen coverage.

We should always use the dimensions intended for the specific vehicle.

5. How Often Should I Change Hyundai i30 Wiper Blades?

We recommend inspecting the blades regularly and considering replacement approximately every 6 to 12 months.

If the blades leave streaks, squeak, skip, or show visible rubber damage, they may need replacing sooner.

Harsh Australian weather conditions can accelerate deterioration.

Conclusion: What Size Wiper Blades Does a Hyundai i30 Need?

Finding the correct Hyundai i30 wiper blades size is straightforward once we identify the vehicle's generation and body style.

For the first-generation FD, the commonly listed front combination is 24 and 18 inches. The second-generation GD generally uses 26 and 14 inches, while the third-generation PD hatchback typically requires 26 and 16 inches.

Rear wiper measurements also vary, and the Hyundai i30 Sedan requires special attention because of differences between aftermarket fitment catalogues.

Before purchasing replacement blades, we should verify the existing measurements, check the connector type, and confirm compatibility with our exact model.

By choosing correctly sized blades and maintaining them regularly, we can improve windscreen visibility, reduce unwanted noise, and enjoy more dependable performance in Australian driving conditions.

Ultimately, investing in high-quality Hyundai i30 windscreen wipers is a simple and worthwhile way to maintain comfort and safety throughout the year.

Hyundai i30 Years to Avoid in Australia (2026 Guide)