Kia EV5 Tyre Pressure: Recommended PSI, Tyre Sizes and TPMS Guide Australia

Maintaining the correct Kia EV5 tyre pressure is essential for safety, driving comfort, tyre longevity and electric driving efficiency. Whether we own the entry-level EV5 Air, the all-wheel-drive Earth or the premium GT-Line, proper tyre inflation can make a noticeable difference to the way this electric SUV performs.
Unlike conventional petrol vehicles, electric SUVs carry substantial battery weight and deliver immediate torque. This makes tyre maintenance particularly important, especially when driving long distances, carrying passengers or travelling on Australian highways.
So, what is the correct tyre pressure for the Kia EV5?
Kia's Australian MY25 owner's manual specifies 35 PSI (240 kPa or 2.4 bar) for its listed 18-inch and 19-inch tyre configurations, measured when the tyres are cold. The EV5 GT-Line's 20-inch tyres should be inflated according to the pressure label fitted to the vehicle, as the published manual does not list that wheel size in its pressure table.
In this guide, we'll explain the recommended tyre pressures, differences between EV5 variants, how to check tyre pressure through the dashboard and what to do when the tyre pressure warning light appears.
- What Is the Recommended Kia EV5 Tyre Pressure?
- Kia EV5 Tyre Pressure by Model
- Where to Find the Kia EV5 Tyre Pressure Sticker
- How to Check Kia EV5 Tyre Pressure
- How to Check Kia EV5 Tyre Pressure on the Dashboard
- Kia EV5 Tyre Pressure Warning Light: What Does It Mean?
- How to Reset the Kia EV5 Tyre Pressure Warning
- Does Tyre Pressure Affect Kia EV5 Driving Range?
- Kia EV5 Tyre Pressure in Hot Australian Weather
- Kia EV5 Tyre Pressure in Cold Weather
- Kia EV5 Tyre Pressure When Fully Loaded
- How Often Should We Check Kia EV5 Tyre Pressure?
- Common Signs of Incorrect Kia EV5 Tyre Pressure
- Kia EV5 Tyre Maintenance Tips
- Does the Kia EV5 Have a Spare Tyre?
- Common Kia EV5 Tyre Pressure Mistakes to Avoid
- Frequently Asked Questions About Kia EV5 Tyre Pressure
- Conclusion: What Is the Best Tyre Pressure for the Kia EV5?
What Is the Recommended Kia EV5 Tyre Pressure?
For the 18-inch and 19-inch configurations covered by Kia Australia's MY25 owner's manual, the recommended cold tyre inflation pressure is:
- Front tyres: 35 PSI (240 kPa)
- Rear tyres: 35 PSI (240 kPa)
- Pressure in bar: 2.4 bar
- Measurement condition: Cold tyres
These specifications apply to the tyre sizes listed in that manual for normal and maximum loads.
However, the exact recommended pressure for our EV5 should always be confirmed using the tyre pressure label located on the driver's side centre door pillar.
This is particularly important if we own a later model, a GT-Line with 20-inch wheels or a vehicle fitted with replacement tyres.
Kia EV5 Tyre Pressure Chart Australia
The following table combines the Australian MY26 tyre sizes with the confirmed pressures listed in Kia's MY25 owner's manual.
| Kia EV5 variant | Tyre size | Recommended cold pressure |
|---|---|---|
| EV5 Air Standard Range | 225/60 R18 | 35 PSI / 240 kPa |
| EV5 Air Long Range | 225/60 R18 | 35 PSI / 240 kPa |
| EV5 Earth AWD Long Range | 235/55 R19 | 35 PSI / 240 kPa |
| EV5 GT-Line AWD Long Range | 255/45 R20 | Check vehicle tyre placard |
The MY25 and MY26 equipment specifications are not identical, so we should verify the tyres actually fitted to our vehicle.
Important: The table is a reference, not a replacement for the vehicle's tyre placard. Kia's Australian MY25 manual confirms the pressures for 225/60 R18 and 235/55 R19 tyres, but does not provide a separate 20-inch EV5 GT-Line pressure specification.
Kia EV5 Tyre Pressure by Model
Different Kia EV5 variants use different wheel and tyre combinations. Understanding these differences helps us maintain the right pressures and choose suitable replacement tyres.
Kia EV5 Air Tyre Pressure
The Kia EV5 Air is the entry-level model in the Australian lineup.
In the MY26 Australian specification, both Standard Range and Long Range Air models use 18-inch alloy wheels with 225/60 R18 tyres.
For this tyre configuration, Kia's Australian owner's manual lists:
- Front: 35 PSI
- Rear: 35 PSI
- Equivalent pressure: 240 kPa
The relatively generous tyre sidewall helps absorb small bumps and road imperfections.
This can make the EV5 Air a comfortable option for everyday commuting, suburban driving and longer Australian road trips.
Nevertheless, incorrect tyre pressure can reduce this comfort advantage.
An underinflated tyre may feel softer initially but can generate excessive heat and flex during normal driving.
Kia EV5 Earth Tyre Pressure
The Australian MY26 Kia EV5 Earth AWD Long Range uses 19-inch alloy wheels with 235/55 R19 tyres.
Kia's published Australian manual specifies 35 PSI or 240 kPa for this size.
The Earth is an all-wheel-drive model, which makes balanced tyre pressures particularly important.
Maintaining the recommended inflation pressure helps promote predictable handling, even tyre wear and consistent traction.
We should not assume the rear tyres require extra pressure simply because the vehicle has all-wheel drive.
Instead, follow the manufacturer's front and rear specifications.
Kia EV5 GT-Line Tyre Pressure
The Kia EV5 GT-Line is the premium variant in the Australian EV5 range and uses 20-inch alloy wheels with 255/45 R20 tyres.
These tyres are wider and have a lower-profile sidewall than those fitted to the Air and Earth variants.
Because the Australian MY25 owner's manual's tyre-pressure table does not include this size, we recommend checking the GT-Line's own tyre pressure placard for its exact cold inflation specification.
We should not automatically increase the pressure because the vehicle has larger wheels.
The appropriate figure depends on the vehicle and tyre combination, rather than wheel diameter alone.
Correct inflation is especially important for the GT-Line because low-profile tyres can be more vulnerable to impacts from potholes and sharp road edges.
Where to Find the Kia EV5 Tyre Pressure Sticker
The easiest way to confirm the correct tyre pressure is to inspect the manufacturer's tyre information label.
On the Kia EV5, this label is located on the driver's side centre pillar, visible when the driver's door is open.
The sticker typically provides information such as:
- Original tyre dimensions
- Recommended front tyre pressure
- Recommended rear tyre pressure
- Inflation values in kPa or PSI
- Vehicle loading information
We recommend checking this label before using any pressure recommendation found online.
The tyre sidewall also displays important information, but the pressure shown there may represent a maximum permissible inflation pressure rather than the correct operating pressure for the vehicle.
Always use the vehicle manufacturer's recommended cold tyre pressure, not the maximum pressure printed on the tyre sidewall.
How to Check Kia EV5 Tyre Pressure
Checking tyre pressure is straightforward, and it is one of the easiest maintenance tasks we can perform ourselves.
Step 1: Allow the Tyres to Cool Down
Kia recommends checking tyre pressures when the tyres are cold.
A tyre is considered cold when the vehicle has been parked for at least three hours or has travelled less than approximately 1.6 kilometres.
This content may interest you!
Kia EV5 Charging at Home: Complete Australian Guide to Charging Times, Costs and ChargersThis matters because driving generates heat, causing tyre pressure readings to rise.
Step 2: Locate the Recommended Pressure
Open the driver's door and find the tyre pressure sticker.
Check the recommended values for the tyres fitted to our EV5.
If the front and rear specifications differ, follow the appropriate value for each axle.
Step 3: Remove the Valve Cap
Unscrew the valve cap from the first tyre.
Keep it somewhere safe to prevent it from getting lost.
Step 4: Measure the Pressure
Attach a reliable digital or analogue tyre pressure gauge to the valve.
Press firmly to prevent air from escaping.
Compare the measured pressure with the manufacturer's recommendation.
Step 5: Inflate or Adjust the Tyre
If the pressure is below the recommended value, use an appropriate tyre inflator or air compressor.
Add air gradually and measure again.
If the tyre is overinflated while cold, release a small amount of air until the recommended pressure is reached.
Step 6: Repeat for All Four Tyres
Check every tyre individually.
Even when three tyres have identical readings, the fourth may have lost pressure due to a puncture, temperature changes or a leaking valve.
Finally, reinstall the valve caps securely.
How to Check Kia EV5 Tyre Pressure on the Dashboard
One useful feature of the Kia EV5 is its Tyre Pressure Monitoring System, commonly known as TPMS.
This system monitors tyre inflation and can alert us when one or more tyres become significantly underinflated.
To access the tyre pressure information:
- Switch on the vehicle.
- Locate the cluster menu button on the steering wheel.
- Press the button to access the instrument cluster menus.
- Select Information Mode.
- Navigate to the tyre pressure information display.
Depending on the vehicle settings, pressure readings may be displayed in PSI, kPa or bar.
The system may need the vehicle to be driven before updated readings become available.
Can We Change the Tyre Pressure Units?
Yes. Kia's EV5 owner's manual describes the option to change the displayed tyre pressure units through the instrument cluster user settings.
The available units include:
| Unit | Example |
|---|---|
| PSI | 35 PSI |
| kPa | 240 kPa |
| Bar | 2.4 bar |
Australian drivers commonly encounter both PSI and kPa when checking tyre pressures.
Knowing how to convert between these units is useful when using different tyre inflation equipment.
Kia EV5 Tyre Pressure Warning Light: What Does It Mean?
The Kia EV5 has a tyre pressure warning indicator that normally appears as a yellow or amber horseshoe-shaped symbol containing an exclamation mark.
When this warning illuminates, one or more tyres may have insufficient pressure.
Possible causes include:
- A gradual loss of tyre pressure
- A puncture caused by a nail or sharp object
- Cold weather reducing tyre pressure
- A leaking tyre valve
- An incorrectly inflated tyre
- A TPMS sensor fault
We should never ignore this warning, particularly if the vehicle feels unstable or one tyre appears visibly deflated.
What to Do When the Warning Light Appears
If the low tyre pressure warning light comes on while driving:
- Reduce speed gradually.
- Avoid aggressive steering, braking or acceleration.
- Stop in a safe location.
- Visually inspect all four tyres.
- Check the pressures using a tyre gauge.
- Inflate the affected tyre to the manufacturer's recommended cold pressure when appropriate.
- Inspect for punctures or other damage.
If a tyre is severely deflated or visibly damaged, we should not continue driving until the problem has been properly assessed.
Continuing to drive on a damaged tyre can lead to sudden failure.
How to Reset the Kia EV5 Tyre Pressure Warning
After adjusting the tyre pressures, owners sometimes notice that the warning indicator remains illuminated.
This does not necessarily mean there is a problem with the vehicle.
In normal operation, the EV5's TPMS can clear a low-pressure warning after the system recognises that the affected tyre has been correctly inflated.
There is not generally a separate manual reset button required for ordinary tyre inflation.
Steps to Clear the Warning
- Check all four tyres with a reliable gauge.
- Inflate them according to the vehicle placard.
- Turn the vehicle on.
- Allow the TPMS to update its readings.
- Drive normally when it is safe to do so.
- Check whether the warning disappears.
If the warning remains after the system has had an opportunity to update, recheck the tyre pressures and inspect for air leaks.
A warning light that flashes for approximately one minute before remaining illuminated may indicate a TPMS system malfunction rather than simply low tyre pressure.
In this case, professional diagnosis may be necessary.
Does Tyre Pressure Affect Kia EV5 Driving Range?
Yes. Tyre pressure can affect the efficiency and available driving range of the Kia EV5.
Electric vehicles are particularly sensitive to unnecessary energy consumption because their driving range depends on how efficiently they use the energy stored in the battery.
Underinflated Tyres Increase Rolling Resistance
When tyre pressure is too low, the tyre deforms more as it rolls along the road.
This content may interest you!
This increases rolling resistance and means the electric motor may need to use more energy to maintain speed.
As a result, we may experience:
- Higher electricity consumption
- Reduced driving range
- Increased tyre temperatures
- Faster or uneven tyre wear
The exact reduction in driving range depends on the degree of underinflation, driving conditions, tyre construction and vehicle load.
Should We Increase Tyre Pressure to Improve Range?
Some electric vehicle owners increase tyre pressures above the manufacturer's recommendation in an attempt to improve efficiency.
Although higher pressures may reduce rolling resistance in certain conditions, this approach can introduce disadvantages.
Overinflation may:
- Make the ride noticeably firmer
- Reduce comfort over rough roads
- Increase wear near the centre of the tread
- Make tyres more vulnerable to certain road impacts
For everyday driving, we recommend using the pressure specified by Kia rather than experimenting with significantly higher values.
Kia EV5 Tyre Pressure in Hot Australian Weather
Australia's climate presents some unique challenges for tyre maintenance.
During summer, road surfaces can become extremely hot, particularly in inland regions and on highways.
As tyres warm up, their internal air pressure rises.
Kia's owner's manual explains that warm tyre pressures may be approximately 4–6 PSI higher than the recommended cold pressure.
For example, a tyre inflated to 35 PSI while cold may display a higher reading after an extended drive.
This does not automatically indicate overinflation.
Should We Release Air from Hot Tyres?
No. We should not reduce tyre pressure simply because the reading is higher after driving.
Releasing air from a hot tyre can leave it underinflated once it cools.
Instead, allow the tyres to cool and check the pressure again.
If we frequently drive in very hot weather, regular pressure inspections become especially important.
Underinflated tyres generate additional heat, which can increase the risk of tyre damage during long-distance journeys.
Kia EV5 Tyre Pressure in Cold Weather
Cold conditions can also affect tyre inflation.
When the surrounding temperature decreases, tyre pressure typically falls.
This explains why some drivers notice a tyre pressure warning on cold mornings even when the tyres appeared normal the previous day.
This situation may be particularly relevant in colder parts of Victoria, Tasmania, the Australian Capital Territory and alpine regions.
How Should We Adjust the Pressure?
We should measure the pressure while the tyres are cold and adjust it to the vehicle's recommended cold inflation specification.
It is not necessary to use a completely different tyre pressure simply because the weather is cold.
However, seasonal temperature changes make regular checks more important.
The tyre pressure monitoring system should not be treated as a replacement for manual inspections.
Kia EV5 Tyre Pressure When Fully Loaded
The Kia EV5 is a practical family SUV, making it suitable for holidays, shopping trips and carrying passengers.
However, additional weight places more demand on the tyres.
When preparing for a long journey with passengers and luggage, we should confirm whether the vehicle's tyre placard specifies a different pressure for higher loads.
The Australian MY25 manual lists 240 kPa for normal and maximum loads for its specified 18-inch and 19-inch tyre configurations.
Nevertheless, we should check the instructions applicable to our particular vehicle.
What About Towing?
If our EV5 is equipped and approved for towing, tyre maintenance becomes even more important.
We should:
- Check the tyre placard before departure.
- Confirm the vehicle and trailer are within their permitted weight limits.
- Inspect tyre condition and tread depth.
- Check trailer tyre pressures separately.
- Ensure the trailer's weight is distributed correctly.
We should not assume that towing automatically requires adding a fixed amount of air to the EV5 tyres.
Follow Kia's instructions for the vehicle and loading conditions.
How Often Should We Check Kia EV5 Tyre Pressure?
Kia recommends checking tyre pressures at least once a month when cold.
For everyday Australian driving, this is a sensible minimum.
We should also check the pressures before a long road trip, after a significant temperature change or whenever a tyre appears unusual.
| Situation | Recommended action |
|---|---|
| Normal daily driving | Check monthly |
| Before a long road trip | Check before departure |
| After a major temperature change | Recheck when cold |
| TPMS warning appears | Check as soon as safely possible |
| After tyre replacement | Confirm pressure and sensor operation |
| After hitting a large pothole | Inspect tyre and wheel for damage |
Regular tyre inspections can also help us identify issues before they become expensive repairs.
Common Signs of Incorrect Kia EV5 Tyre Pressure
Not every tyre pressure problem will immediately trigger a dashboard warning.
Learning to recognise the symptoms can help us identify a problem earlier.
This content may interest you!
Hyundai i30 Tyre Pressure: Complete GuideSigns of Low Tyre Pressure
Common symptoms include:
- Reduced steering responsiveness
- Uneven tyre wear along the shoulders
- Increased electricity consumption
- The vehicle pulling to one side
- Excessive tyre heat
- A visibly deflated tyre
A slow puncture may cause pressure to decline gradually over several days.
If one tyre repeatedly loses air while the others maintain their pressure, the tyre should be inspected.
Signs of Excessive Tyre Pressure
Overinflated tyres can produce different symptoms.
These may include:
- A harsher ride
- Increased vibration over rough surfaces
- Excessive wear along the centre of the tread
- Reduced comfort on uneven roads
- Greater susceptibility to damage from certain impacts
If we suspect the tyres are overinflated, the correct approach is to measure their pressure when cold rather than making adjustments based on appearance alone.
Kia EV5 Tyre Maintenance Tips
Correct inflation is only one part of proper tyre maintenance.
The EV5's battery weight and instant torque make maintaining tyre condition particularly important.
Rotate the Tyres Regularly
Kia's Australian owner's manual recommends rotating the tyres approximately every 10,000 kilometres, or sooner if uneven wear develops.
Tyre rotation helps distribute wear more evenly and may extend the useful life of the tyres.
However, rotation patterns depend on tyre type, directionality and whether the front and rear wheels use matching sizes.
Check Wheel Alignment
Incorrect wheel alignment can cause uneven tyre wear and affect vehicle handling.
We should consider an alignment inspection if the EV5 pulls to one side, the steering wheel appears off-centre or the tyres show unusual wear patterns.
Inspect Tyre Tread
We should regularly examine the tyres for worn tread, cuts, bulges and embedded objects.
Tyres with visible structural damage should be inspected by a qualified professional.
Use Suitable Replacement Tyres
When replacing tyres, choose products that meet Kia's specified dimensions, load ratings and speed ratings.
Using tyres that are unsuitable for the vehicle can affect handling, efficiency, ride quality and safety.
If we change wheel sizes, we should obtain the correct inflation recommendation for the new tyre configuration.
Does the Kia EV5 Have a Spare Tyre?
Australian Kia EV5 specifications list a Tyre Mobility Kit rather than a conventional spare wheel.
This kit is intended to assist with certain minor tyre punctures.
However, it cannot repair every type of damage.
Major cuts, sidewall damage and some larger punctures may require professional assistance or vehicle recovery.
Before travelling to remote Australian locations, we recommend checking that the supplied kit is complete and understanding how it works.
It is also worth confirming roadside assistance arrangements before a long journey.
Common Kia EV5 Tyre Pressure Mistakes to Avoid
Tyre maintenance is relatively simple, but several mistakes are worth avoiding.
Using the tyre sidewall maximum pressure: The maximum rating on the tyre is not necessarily the manufacturer's recommended operating pressure.
Checking only when the warning light appears: The TPMS may not warn us about smaller pressure deviations.
Deflating hot tyres: Pressure naturally increases as tyres warm up during driving.
Assuming every EV5 uses the same specification: Tyre dimensions and recommended pressures can vary by model year and market.
Ignoring repeated pressure loss: A tyre that repeatedly needs additional air may have a puncture or leaking valve.
Inflating tyres by appearance: A tyre can be significantly underinflated without looking obviously flat.
Avoiding these errors helps maintain consistent handling, comfort and tyre performance.
Frequently Asked Questions About Kia EV5 Tyre Pressure
1. What PSI Should Kia EV5 Tyres Be?
Kia Australia's MY25 owner's manual specifies 35 PSI (240 kPa) for the front and rear tyres in its listed 18-inch and 19-inch configurations. Owners of the 20-inch GT-Line should check the tyre pressure placard fitted to their vehicle for the correct specification.
2. How Do I Check Tyre Pressure on My Kia EV5?
We can check tyre pressure manually using a suitable gauge or view the available TPMS information through the instrument cluster. Press the cluster menu button on the steering wheel and select Information Mode to access tyre pressure information.
3. How Do I Reset the Kia EV5 Tyre Pressure Warning?
First, check and correct the tyre pressures according to the vehicle placard. The TPMS can update and clear a low-pressure warning after recognising the corrected pressure. If the warning remains or flashes before staying illuminated, the tyres or monitoring system may require inspection.
4. Does Low Tyre Pressure Reduce Kia EV5 Range?
Yes. Underinflated tyres increase rolling resistance, potentially causing the electric motor to use more energy. Maintaining the recommended pressure helps support efficient driving and consistent range.
5. How Often Should I Inflate My Kia EV5 Tyres?
We should check the tyre pressure at least once a month and add air whenever the cold pressure is below the manufacturer's recommendation. Additional checks are advisable before long journeys, following major temperature changes or when a TPMS warning appears.
Conclusion: What Is the Best Tyre Pressure for the Kia EV5?
The correct Kia EV5 tyre pressure depends on the vehicle's tyre configuration, model year and manufacturer's specifications.
For the 18-inch and 19-inch tyre sizes covered in Kia Australia's MY25 owner's manual, the recommended cold inflation pressure is 35 PSI (240 kPa or 2.4 bar) at both the front and rear.
For the GT-Line's 20-inch tyres, the vehicle's tyre pressure placard should be used to confirm the correct value.
Regardless of which EV5 variant we drive, proper tyre inflation supports safer handling, better ride comfort, reduced tyre wear and more efficient electric driving.
This content may interest you!
Subaru Crosstrek Tyre Pressure: Recommended PSI, Tyre Sizes and Complete GuideBy checking our tyres monthly, monitoring the TPMS and following Kia's specifications, we can help keep the EV5 performing at its best on Australian roads.

Leave a Reply