0%

BYD Shark 6 Weight: Kerb Weight, GVM, Payload and Towing Explained

The BYD Shark 6 has quickly established itself as an interesting alternative to traditional diesel-powered utes in Australia. With its plug-in hybrid powertrain, impressive acceleration, all-wheel-drive system and practical dual-cab design, it offers something different from conventional workhorses.

However, one question deserves particular attention before buying: How much does the BYD Shark 6 weigh?

The answer is important because vehicle weight affects payload capacity, towing performance, fuel consumption, handling and how much equipment you can legally carry.

The BYD Shark 6 Premium has a kerb weight of 2,710 kg, while the more powerful Performance variant weighs 2,775 kg. The Dynamic Cab Chassis has a listed kerb weight of 2,600 kg before a tray or body is fitted.

All three versions have a maximum Gross Vehicle Mass (GVM) of 3,500 kg.

In this guide, we'll explain the BYD Shark 6 weight specifications for Australia, compare the available versions and explore what these numbers mean for everyday driving, work and towing.

What you will find:

How Much Does the BYD Shark 6 Weigh?

The BYD Shark 6 weighs between 2,600 kg and 2,775 kg in its published Australian configurations, depending on the model.

The Premium is the familiar dual-cab pickup equipped with a 1.5-litre turbocharged petrol engine and electric motors. The Performance uses a more powerful 2.0-litre hybrid system, while the Dynamic Cab Chassis is intended for buyers requiring a customised rear tray or body.

BYD Shark 6 Weight Specifications Australia

SpecificationDynamic Cab ChassisPremiumPerformance
Kerb weight2,600 kg2,710 kg2,775 kg
Gross Vehicle Mass (GVM)3,500 kg3,500 kg3,500 kg
Nominal payload900 kg*790 kg725 kg
Gross Combined Mass (GCM)5,750 kg5,750 kg6,650 kg
Braked towing capacity2,500 kg2,500 kg3,500 kg
Unbraked towing capacity750 kg750 kg750 kg
Maximum towball download250 kg250 kg350 kg

The Dynamic Cab Chassis figures are based on the vehicle without a fitted rear tray or body. Adding one reduces the available payload.

These figures reveal an important difference between the models.

Although the Performance can tow more than the Premium, it also weighs more and has a lower available payload. Buyers need to consider both numbers rather than concentrating on towing capacity alone.

BYD Shark 6 Kerb Weight Explained

Kerb weight is one of the most commonly quoted vehicle specifications.

It generally refers to the weight of a vehicle with its standard equipment and operating fluids, including fuel, but without passengers or additional cargo.

The BYD Shark 6 Premium has a kerb weight of 2,710 kg, equivalent to approximately 2.71 tonnes.

In pounds, that is roughly 5,975 lbs.

Why Is the BYD Shark 6 So Heavy?

At first glance, a kerb weight exceeding 2.7 tonnes may seem substantial for a mid-size dual-cab ute.

However, several components contribute to the vehicle's overall mass.

1. Plug-in hybrid battery

The Shark 6 uses a 29.6 kWh BYD Blade Battery, which provides electric driving capability and supports the hybrid powertrain.

Although the battery offers important efficiency and performance benefits, it adds weight compared with a conventional petrol or diesel powertrain without a large traction battery.

2. Petrol engine and electric motors

Unlike a traditional ute powered solely by an internal combustion engine, the Shark 6 combines a turbocharged petrol engine with front and rear electric motors.

This creates a more complex powertrain with additional electrical hardware, including power electronics and associated cooling systems.

3. Structural components

The Shark 6 uses a body-on-frame construction designed to accommodate its hybrid system and provide the structural strength needed for utility vehicle duties.

4. Large vehicle dimensions

With the pickup versions measuring approximately 5,457 mm long, 1,971 mm wide and 1,925 mm high, the Shark 6 is a substantial vehicle.

Its dimensions, body structure, suspension and standard equipment all contribute to the total weight.

The result is a relatively heavy ute, although its electric motors provide substantial torque to help move that weight.

BYD Shark 6 Premium Weight

The BYD Shark 6 Premium is an important reference point because it was the original Australian-market version.

Its main weight specifications include:

  • Kerb weight: 2,710 kg
  • Gross Vehicle Mass: 3,500 kg
  • Payload: 790 kg
  • Gross Combined Mass: 5,750 kg
  • Braked towing capacity: 2,500 kg

The Premium combines a 1.5-litre turbocharged petrol engine with two electric motors, producing a combined maximum output of 321 kW and 650 Nm.

Despite its substantial weight, the Shark 6 Premium has a claimed 0–100 km/h acceleration time of approximately 5.7 seconds.

This is impressive for a vehicle weighing more than 2.7 tonnes.

Is the Premium Too Heavy for Everyday Driving?

Not necessarily.

The Shark 6's substantial weight does not automatically make it difficult to drive.

The electric motors provide strong low-speed response, helping the vehicle accelerate smoothly from a standstill.

Its independent front and rear suspension also contributes to a driving experience that can feel more passenger-car-like than some traditional leaf-sprung diesel utes.

However, the weight remains relevant when braking, cornering, travelling over uneven surfaces and driving with a full load.

Drivers should always account for stopping distances and adapt their speed to road conditions.

BYD Shark 6 Performance Weight

The BYD Shark 6 Performance is the more powerful version of the hybrid ute.

It features a 2.0-litre turbocharged petrol engine paired with electric motors, producing a combined 350 kW and 700 Nm.

Its kerb weight is 2,775 kg.

That makes the Performance approximately 65 kg heavier than the Premium.

Premium vs Performance Weight Comparison

FeaturePremiumPerformance
Kerb weight2,710 kg2,775 kg
GVM3,500 kg3,500 kg
Payload790 kg725 kg
GCM5,750 kg6,650 kg
Braked towing2,500 kg3,500 kg
Combined power321 kW350 kW
Combined torque650 Nm700 Nm

The Performance has a clear advantage when it comes to rated towing capacity.

However, its additional kerb weight means it has 65 kg less payload than the Premium.

For Australians regularly carrying heavy tools, passengers, camping equipment or accessories, this difference deserves consideration.

BYD Shark 6 Dynamic Cab Chassis Weight

The BYD Shark 6 Dynamic Cab Chassis has a published kerb weight of 2,600 kg.

This makes it the lightest listed Australian Shark 6 configuration.

It also has a nominal payload of 900 kg before a tray or body is fitted.

Unlike the pickup versions, the cab chassis requires additional equipment to create a usable rear load area.

How Does a Tray Affect Its Weight?

Suppose a buyer installs a tray weighing 180 kg.

The estimated weight calculation would be:

2,600 kg + 180 kg = 2,780 kg

With a GVM of 3,500 kg, the remaining theoretical payload becomes:

3,500 kg − 2,780 kg = 720 kg

This is an illustrative calculation rather than an official payload figure for a particular tray.

This content may interest you!Subaru Crosstrek Weight: Kerb Weight, Payload and GVM ExplainedSubaru Crosstrek Weight: Kerb Weight, Payload and GVM Explained

A heavier tray, toolboxes, drawers, canopies and other accessories would reduce the remaining carrying capacity further.

For this reason, anyone buying the Dynamic Cab Chassis for work should establish the completed vehicle's weight before assuming it can carry 900 kg.

What Is the BYD Shark 6 GVM?

The BYD Shark 6 has a Gross Vehicle Mass of 3,500 kg across the Australian variants discussed here.

GVM represents the maximum permitted weight of the vehicle when loaded.

It includes the vehicle itself, occupants, luggage, accessories and cargo, together with any downward load imposed by a trailer coupling.

For the Premium model, the calculation is:

3,500 kg GVM − 2,710 kg kerb weight = 790 kg payload.

This means the standard Premium has a nominal allowance of 790 kg above its published kerb weight.

Does GVM Include Passengers?

Yes.

Passengers count towards the vehicle's total loaded weight.

For example, consider a BYD Shark 6 Premium carrying:

ItemWeight
Vehicle kerb weight2,710 kg
Driver and passengers250 kg
Camping equipment120 kg
Luggage60 kg
Additional accessories50 kg
Total vehicle weight3,190 kg

In this example, the vehicle would have approximately 310 kg remaining before reaching its 3,500 kg GVM.

That remaining capacity would need to accommodate any further cargo or trailer towball download.

It is important to use realistic passenger and equipment weights rather than estimates that are too optimistic.

BYD Shark 6 Payload Capacity

Payload is arguably one of the most important specifications for Australian ute buyers.

It determines how much additional weight the vehicle can carry within its legal GVM.

The BYD Shark 6 Premium has a nominal payload of 790 kg, while the Performance has 725 kg.

These figures are lower than the approximately one-tonne payload offered by some conventional ute configurations.

Is 790 kg Enough for a Dual-Cab Ute?

For many everyday users, 790 kg may be sufficient.

A typical family carrying luggage, sporting equipment and occasional hardware store purchases may have plenty of capacity.

However, tradespeople and touring enthusiasts should calculate their loads carefully.

Heavy toolboxes, steel canopies, roof racks, recovery equipment and camping accessories can use a significant portion of the available allowance.

Consider a hypothetical setup:

  • Four occupants: 300 kg
  • Tools and equipment: 200 kg
  • Canopy and accessories: 120 kg
  • Luggage and supplies: 100 kg

The total additional weight is 720 kg.

That leaves only 70 kg of the Premium's nominal 790 kg payload.

And that is before adding any trailer towball download.

How to Increase Usable Payload

The most practical way to preserve payload is to reduce unnecessary weight.

Choosing lighter accessories, avoiding oversized storage systems and removing equipment that is not needed can make a meaningful difference.

A professionally engineered GVM upgrade may be another possibility where one is specifically available and legally approved for the vehicle.

However, owners should never assume that an upgrade exists or that modifying the suspension automatically increases the vehicle's legal weight rating.

BYD Shark 6 Towing Weight

Towing is another area where the Shark 6's weight specifications are particularly important.

The Premium and Dynamic Cab Chassis have a maximum braked towing capacity of 2,500 kg.

The Performance increases that figure to 3,500 kg.

All three have an unbraked towing limit of 750 kg.

What Is Gross Combined Mass?

Gross Combined Mass, or GCM, is the maximum permitted combined mass of the loaded vehicle and the portion of the trailer's mass carried on its own wheels.

The Shark 6 Premium has a GCM of 5,750 kg.

The Performance increases that limit to 6,650 kg.

It is important not to confuse trailer Aggregate Trailer Mass (ATM) with the actual mass supported by the trailer's wheels when connected.

Towball download transfers part of the trailer's weight onto the towing vehicle.

Example: Towing With the Shark 6 Premium

Imagine a Shark 6 Premium towing a trailer with an ATM of 2,500 kg and a towball download of 250 kg.

The trailer's axle-supported mass would be approximately 2,250 kg when loaded to that ATM.

If the loaded Shark 6, including the 250 kg towball download, weighs 3,440 kg, the combined mass would be:

3,440 kg + 2,250 kg = 5,690 kg.

That falls below the Premium's 5,750 kg GCM, while the vehicle itself remains below its 3,500 kg GVM.

However, the combined arrangement would have limited remaining weight capacity.

This example demonstrates why the GVM, GCM, trailer ATM, towball download and axle limits must all be checked together.

The advertised towing capacity does not mean every combination of passengers, cargo and trailer loading is permissible.

How Does the BYD Shark 6 Weight Affect Fuel Consumption?

Vehicle weight can influence fuel consumption, particularly during acceleration, on hilly roads and when carrying heavy loads.

The BYD Shark 6 compensates for some of its mass through its plug-in hybrid powertrain.

Its battery and electric motors allow it to operate electrically under suitable conditions.

For the Premium, BYD publishes a combined fuel consumption figure of 2.0 L/100 km with sufficient battery charge under the NEDC test cycle.

When the battery state of charge is low, its published consumption rises to 7.9 L/100 km under the corresponding test conditions.

The Performance uses a different engine configuration, and its published WLTP figures are 1.3 L/100 km with sufficient charge and 10.5 L/100 km in the low-charge test condition.

These figures are from different test cycles and should not be treated as directly equivalent.

Does a Heavier Load Reduce Electric Range?

Generally, yes.

Carrying additional cargo increases the energy required to accelerate and move the vehicle, particularly over hills.

The actual impact depends on driving speed, terrain, weather, tyre pressures and the amount of additional weight.

This content may interest you!BYD Shark 6 Fuel Tank Size: How Big Is It and How Far Can You Drive?BYD Shark 6 Fuel Tank Size: How Big Is It and How Far Can You Drive?

For city driving, the electric motors can make the vehicle feel responsive despite its considerable mass.

For highway touring or towing, aerodynamic drag, terrain and total load become increasingly important.

BYD Shark 6 Weight vs Traditional Diesel Utes

The BYD Shark 6 competes with familiar Australian dual-cab utes such as the Toyota HiLux, Ford Ranger, Isuzu D-MAX and Mitsubishi Triton.

Many conventional diesel versions of these vehicles are lighter than the Shark 6, although the comparison varies significantly by model, drivetrain and equipment.

The Shark 6 carries extra hybrid components, including its relatively large traction battery.

This contributes to its higher kerb weight and more limited payload in some configurations.

Does Being Heavier Make the Shark 6 Worse?

Not automatically.

A heavier vehicle may offer a planted feel on the road, but its weight also increases the demands placed on tyres, brakes and other components.

The Shark 6's hybrid system delivers rapid acceleration and strong torque.

Nevertheless, owners planning heavy-duty commercial use should consider whether its available payload suits their requirements.

The right choice depends on how the ute will actually be used.

For commuting and weekend adventures, the Shark 6 may be very appealing. For constant heavy loads, a conventional ute with a higher rated payload could be more practical.

BYD Shark 6 Weight Distribution and Handling

Vehicle weight distribution influences steering response, traction and stability.

The Shark 6's hybrid architecture places major components throughout the vehicle, including a battery integrated into the chassis structure.

However, the overall handling experience depends on much more than the location of the battery.

Suspension tuning, tyre characteristics, load placement and road conditions all contribute.

What Happens When You Load the Rear Tub?

Adding cargo changes the weight distribution and increases the load on the suspension and tyres.

Placing heavy items too far behind the rear axle can also influence vehicle stability.

To maintain safe handling:

  • Keep heavy cargo as low as practical.
  • Position loads securely and distribute weight appropriately.
  • Follow the manufacturer's tyre pressure recommendations.
  • Avoid exceeding the rear axle load limit.
  • Allow additional braking distance when heavily loaded.

These recommendations are particularly important when combining a full passenger load with cargo and a trailer.

BYD Shark 6 Weight for Camping and Off-Road Travel

For many Australians, one of the main attractions of a dual-cab ute is the ability to explore remote areas.

The Shark 6 offers a plug-in hybrid powertrain, all-wheel drive and useful ground clearance, making it an interesting touring option.

However, its relatively high kerb weight and moderate payload deserve attention.

Camping Equipment Adds Up Quickly

A touring setup may include a canopy, roof rack, fridge, recovery equipment, camping gear, water storage and additional supplies.

Each item reduces available payload.

For example, a loaded water container holding 50 litres contributes roughly 50 kg from the water alone, excluding the weight of the container.

A canopy, drawers and heavy accessories may consume considerably more.

The best approach is to create a realistic list of equipment weights before purchasing accessories.

Does the Shark 6 Weight Affect Off-Road Performance?

Yes, weight can influence performance on sand, mud and soft terrain.

A heavier vehicle may require more effort to move through difficult surfaces and can be harder to recover if it becomes stuck.

Tyre choice, tyre pressures, driver technique and traction conditions also play major roles.

The Shark 6 has useful hybrid torque and all-wheel drive, but these features do not eliminate the disadvantages of excessive weight when travelling off-road.

Is the BYD Shark 6 Too Heavy?

Whether the BYD Shark 6 is too heavy depends on what you expect from a ute.

For buyers seeking a comfortable, powerful plug-in hybrid for commuting, family transport and occasional recreational use, its kerb weight may not be a major concern.

Its hybrid powertrain gives it strong performance, while the ability to charge externally can help reduce petrol consumption in suitable driving conditions.

For buyers planning heavy commercial work, the situation is different.

The Premium's 790 kg payload and the Performance's 725 kg payload require careful planning when carrying passengers, accessories and equipment.

The Performance offers substantially greater towing capacity, but that does not increase its available payload.

Ultimately, the Shark 6 is best assessed by its complete weight specifications, not merely the size of its engine or its advertised towing rating.

How to Check Your BYD Shark 6's Actual Weight

Published kerb weight is a useful starting point, but your own vehicle may weigh more after accessories are fitted.

A practical way to check is by using a certified public weighbridge.

For an accurate assessment, weigh the vehicle in its normal travelling configuration, including passengers, equipment and fuel.

If towing, obtain the measurements required to establish the vehicle's loaded mass, trailer axle-supported mass and combined mass.

Compare these measurements with the applicable GVM, GCM, axle and towing limits.

Remember that exceeding an individual axle limit can be a problem even if the overall vehicle weight remains below its maximum GVM.

The vehicle's compliance information, owner's handbook and current manufacturer specifications should always take priority.

Frequently Asked Questions About BYD Shark 6 Weight

1. What is the kerb weight of the BYD Shark 6 in Australia?

The BYD Shark 6 Premium has a kerb weight of 2,710 kg. The Performance weighs 2,775 kg, while the Dynamic Cab Chassis is listed at 2,600 kg before fitting a rear tray or body.

2. What is the GVM of the BYD Shark 6?

The BYD Shark 6 has a maximum Gross Vehicle Mass of 3,500 kg across its Australian Premium, Performance and Dynamic Cab Chassis variants. This includes the vehicle and everything it carries.

3. How much payload can the BYD Shark 6 carry?

The Premium has a nominal payload of 790 kg, while the Performance has 725 kg. The Dynamic Cab Chassis offers a nominal 900 kg before the weight of a fitted tray or body is deducted.

4. Is the BYD Shark 6 heavier than a Ford Ranger?

The BYD Shark 6 Premium is heavier than many conventional diesel Ford Ranger configurations, although the comparison depends on the exact Ranger variant. The Shark 6 Premium's kerb weight is 2,710 kg, and the Performance weighs 2,775 kg.

5. How much can the BYD Shark 6 tow?

The BYD Shark 6 Premium and Dynamic Cab Chassis have a maximum braked towing capacity of 2,500 kg. The Performance can tow up to 3,500 kg braked. All versions have a 750 kg unbraked towing limit, subject to the vehicle's other weight restrictions.

Conclusion: Understanding the BYD Shark 6 Weight

The BYD Shark 6 is a substantial plug-in hybrid ute, weighing 2,710 kg in Premium form and 2,775 kg in Performance form. The Dynamic Cab Chassis starts at a published 2,600 kg before a rear tray or body is installed.

While these figures make the Shark 6 relatively heavy compared with many traditional diesel utes, the additional weight comes partly from its advanced hybrid powertrain and associated battery system.

For many Australian buyers, the combination of strong acceleration, electric driving capability, all-wheel drive and everyday practicality will be attractive.

However, payload capacity is the specification we would pay closest attention to, particularly for towing, commercial work and extended camping trips.

The Premium offers 790 kg of nominal payload, compared with 725 kg for the Performance. Both have a 3,500 kg GVM, but their towing and combined mass ratings differ.

Before choosing a BYD Shark 6, consider not only how much the vehicle weighs but also how much weight you intend to carry.

This content may interest you!Chery Tiggo 4 Weight: Complete Guide to Petrol and Hybrid Models in AustraliaChery Tiggo 4 Weight: Complete Guide to Petrol and Hybrid Models in Australia

That is the key to deciding whether this innovative hybrid ute is the right choice for your Australian driving needs.

Leave a Reply

Your email address will not be published. Required fields are marked *

Your score: Useful

Go up