0%

Kia Tasman Wheel Size Australia: Complete Tyre and Rim Guide

The Kia Tasman wheel size varies depending on the model, with Australian variants featuring either 17-inch or 18-inch wheels. Although the difference might seem small, wheel diameter, tyre profile and tread design can significantly influence ride comfort, off-road capability, handling and everyday practicality.

The Kia Tasman is designed to compete with established Australian utes such as the Ford Ranger, Toyota HiLux and Isuzu D-Max. Its wheel and tyre combinations reflect this versatility, ranging from practical steel wheels on the entry-level S to larger alloy wheels on the X-Line and specialised all-terrain tyres on the X-Pro.

If you're considering buying a Kia Tasman, replacing its factory tyres or upgrading to aftermarket rims, understanding the original specifications is essential.

In this guide, we'll explore the 2026 Kia Tasman wheel sizes in Australia, compare the different configurations and explain what to consider before making modifications.

What you will find:

What Size Wheels Does the Kia Tasman Have?

The Australian Kia Tasman comes with 17-inch or 18-inch factory wheels, depending on the variant.

The entry-level S and mid-range SX feature 17-inch wheels, while the SX+ and X-Line use 18-inch alloys. Interestingly, the flagship X-Pro returns to 17-inch wheels to accommodate larger-profile all-terrain tyres.

Kia Tasman Wheel Size by Model

Kia Tasman ModelWheel SizeFactory Tyre SizeWheel Type
Tasman S 4x217 inches265/65 R17Black steel
Tasman S 4x417 inches265/65 R17Black steel
Tasman SX 4x417 inches265/65 R17Grey alloy
Tasman SX+ 4x418 inches265/60 R18Machined alloy
Tasman X-Line 4x418 inches265/60 R18Machined alloy
Tasman X-Pro 4x417 inches265/70 R17Black alloy

These specifications apply to the Australian MY26 range. Equipment may differ in other markets or future model years.

The most important distinction is that the X-Pro uses a taller tyre than the other Tasman variants, despite having smaller-diameter rims than the X-Line.

Kia Tasman S Wheel Size

The Kia Tasman S is the entry-level model, available in both rear-wheel-drive and four-wheel-drive configurations.

Factory Wheel Specifications

  • Wheel diameter: 17 inches
  • Rim width: 7.5 inches
  • Tyre size: 265/65 R17
  • Wheel material: Steel
  • Finish: Black
  • Spare wheel: Full-size steel

These wheels prioritise durability and practicality over appearance.

Steel wheels are particularly suitable for commercial applications because they are generally less expensive to replace and can tolerate the rough conditions often encountered on construction sites and rural roads.

The 265/65 R17 tyres also provide a relatively generous sidewall, helping absorb minor road imperfections.

For Australian buyers using their Tasman primarily as a work ute, the standard 17-inch setup is a sensible choice.

Kia Tasman SX Wheel Size

The Kia Tasman SX maintains the same wheel diameter and tyre dimensions as the S but replaces the steel rims with alloy wheels.

Factory Specifications

  • Wheel diameter: 17 inches
  • Rim width: 7.5 inches
  • Tyre size: 265/65 R17
  • Wheel material: Alloy
  • Finish: Grey
  • Spare wheel: Full-size alloy

The alloy wheels provide a more refined appearance without fundamentally changing the tyre's overall dimensions.

Because the S and SX share the same original tyre size, their standard wheel-and-tyre combinations have similar theoretical rolling diameters.

However, tyre construction, tread patterns, inflation pressure and wheel weight can still influence handling and comfort.

The SX is an attractive middle ground for drivers who want alloy wheels without moving to the larger 18-inch configuration.

Kia Tasman SX+ Wheel Size

The Kia Tasman SX+ introduces larger 18-inch alloy wheels.

Factory Specifications

  • Wheel diameter: 18 inches
  • Rim width: 7.5 inches
  • Tyre size: 265/60 R18
  • Wheel material: Alloy
  • Finish: Machined
  • Spare wheel: Full-size alloy

The change from 265/65 R17 to 265/60 R18 reduces the tyre sidewall height while maintaining almost the same overall tyre diameter.

Consequently, the SX+ has a different appearance without requiring a substantially larger rolling circumference.

The 18-inch wheels give the Tasman a more contemporary look, particularly when combined with its large body and squared-off styling.

For drivers spending most of their time on sealed roads, the SX+ configuration offers a good balance between visual appeal and everyday usability.

Kia Tasman X-Line Wheel Size

The Kia Tasman X-Line also features 18-inch alloy wheels with 265/60 R18 tyres.

Its factory wheel specifications are:

SpecificationKia Tasman X-Line
Wheel diameter18 inches
Rim width7.5 inches
Tyre width265 mm
Tyre aspect ratio60
Tyre constructionRadial
Wheel typeMachined alloy

The X-Line is positioned as a more premium Tasman variant, with exterior styling and equipment designed to appeal to buyers wanting a ute for both work and personal use.

Its 18-inch wheels complement that positioning.

However, buyers planning regular off-road adventures should understand that the X-Line's standard wheel-and-tyre combination is different from the dedicated all-terrain setup offered on the X-Pro.

Kia Tasman X-Pro Wheel Size

The Kia Tasman X-Pro wheel size is 17 inches, paired with 265/70 R17 all-terrain tyres.

This is one of the most significant differences between the X-Line and X-Pro.

X-Pro Wheel and Tyre Specifications

  • Wheel diameter: 17 inches
  • Rim width: 7.5 inches
  • Tyre size: 265/70 R17
  • Wheel material: Alloy
  • Finish: Black
  • Tyre category: All-terrain
  • Factory tyre brand: Hankook
  • Spare wheel: Full-size alloy

Although the X-Pro has smaller rims than the X-Line, its tyres have taller sidewalls and a larger overall diameter.

This configuration offers several advantages when driving on challenging Australian terrain.

Why Does the X-Pro Have 17-Inch Wheels?

Off-road vehicles often benefit from smaller wheels combined with taller-profile tyres.

The extra sidewall provides more flexibility when travelling over rocks, gravel and uneven tracks.

It also allows greater scope for adjusting tyre pressure in suitable off-road conditions, following the tyre manufacturer's recommendations.

Other potential advantages include improved resistance to certain impacts and greater tyre sidewall protection compared with lower-profile alternatives.

The X-Pro's factory all-terrain tyres are designed to provide traction across a wider variety of surfaces.

Combined with the vehicle's off-road suspension setup and electronic differential-locking equipment, they make the X-Pro the most adventure-focused Tasman variant.

Kia Tasman 17-Inch vs 18-Inch Wheels

Choosing between 17-inch and 18-inch wheels depends largely on how you intend to use the vehicle.

Both sizes can work well on Australian roads, but each offers different characteristics.

Feature17-Inch Wheels18-Inch Wheels
Factory variantsS, SX, X-ProSX+, X-Line
Typical focusPracticality and versatilityRoad use and styling
Tyre sidewallGenerally tallerGenerally shorter
Rough-road comfortPotentially betterMore dependent on tyre design
Off-road flexibilityOften advantageousCan be more limited
AppearanceRuggedMore refined
Replacement tyre costVaries by specificationVaries by specification

Ride Comfort

A taller tyre sidewall can provide additional cushioning over potholes, gravel and poorly maintained roads.

However, rim diameter alone does not determine comfort. Tyre pressure, construction, compound and suspension tuning are also important.

Handling

A lower-profile tyre may provide more direct steering responses because the sidewall generally flexes less.

That said, differences in tread design and tyre construction can outweigh the effect of wheel diameter.

Off-Road Capability

For challenging tracks, 17-inch wheels paired with suitable all-terrain tyres are often preferred.

This is one reason Kia equips the Tasman X-Pro with 17-inch wheels instead of the 18-inch wheels fitted to the X-Line.

Understanding Kia Tasman Tyre Sizes

The numbers printed on a tyre sidewall describe its physical dimensions and construction.

For example, consider the Kia Tasman's 265/65 R17 specification.

What Does 265/65 R17 Mean?

265: The nominal tyre width is 265 millimetres.

65: The sidewall height is 65% of the tyre's nominal width.

R: The tyre uses radial construction.

17: The tyre is designed for a 17-inch wheel.

The same interpretation applies to the Tasman's other factory tyre sizes.

Kia Tasman Tyre Diameter Comparison

Although the wheels vary in size, the total tyre diameter tells us more about their relationship.

Tyre SizeApproximate Overall Diameter
265/65 R17776 mm
265/60 R18775 mm
265/70 R17803 mm

These figures are calculated from nominal tyre dimensions. Actual manufactured dimensions can differ slightly.

The 265/65 R17 and 265/60 R18 sizes have almost identical theoretical external diameters.

The X-Pro's 265/70 R17 tyres, however, are approximately 27 mm larger in diameter than the standard 265/65 R17 tyres.

That translates to roughly 13 mm of additional tyre radius.

This larger tyre radius contributes to increased ground clearance, although the X-Pro's overall ground clearance also depends on its suspension and other vehicle-specific differences.

Kia Tasman Wheel Bolt Pattern and Fitment

If you're planning to install aftermarket wheels, diameter is only one part of the equation.

A replacement wheel must also have the correct mounting specifications.

Aftermarket fitment references commonly list the Kia Tasman with the following details:

SpecificationCommonly Listed Fitment
Bolt pattern (PCD)6×139.7 mm
Centre bore95.1 mm
Wheel stud threadM12×1.5
Factory rim diameters17 and 18 inches
Factory rim width7.5 inches

These dimensions should be independently confirmed for the exact vehicle before buying replacement wheels.

What Is the Kia Tasman Bolt Pattern?

The commonly listed Kia Tasman bolt pattern is 6×139.7 mm.

This means the wheel has six mounting holes arranged around a circle measuring 139.7 mm in diameter.

The pattern is widely used on four-wheel-drive vehicles and dual-cab utes.

However, sharing the same bolt pattern does not guarantee that wheels from another vehicle will fit correctly.

Why Wheel Offset Matters

Wheel offset determines how far inward or outward a wheel sits relative to its mounting surface.

Changing the offset can affect:

  • Tyre clearance inside the wheel arches.
  • Suspension component clearance.
  • Steering geometry and feel.
  • Wheel bearing loads.
  • Vehicle track width.
  • Compliance with Australian vehicle modification regulations.

An aftermarket wheel with an unsuitable offset may cause rubbing or place additional stress on components.

For this reason, verify the exact approved offset range rather than assuming any 6×139.7 wheel will fit.

Can You Fit Bigger Wheels on a Kia Tasman?

Yes, aftermarket wheel upgrades may be possible, provided the wheels and tyres are compatible with the vehicle.

Some owners may consider replacing the standard 17-inch wheels with 18-inch alternatives or fitting larger wheels primarily for appearance.

However, several factors must be checked before proceeding.

Upgrading from 17-Inch to 18-Inch Wheels

An 18-inch wheel may be compatible with some Tasman configurations when paired with the correct tyre size and fitment.

Because Kia already offers 18-inch factory wheels on the SX+ and X-Line, there are established factory configurations to use as a reference.

Nevertheless, compatibility must be confirmed for the exact trim and brake package.

The replacement setup must maintain appropriate tyre load capacity, clear the braking system and comply with the manufacturer's requirements.

Can You Install 20-Inch Wheels?

Larger aftermarket wheels may be available, including 20-inch designs.

However, installing larger rims usually requires lower-profile tyres to maintain a suitable overall rolling diameter.

This can reduce sidewall height and potentially increase vulnerability to pothole damage.

For a vehicle intended to carry heavy loads, tow trailers or tackle rough Australian roads, appearance should not take priority over wheel strength, tyre capacity and safe handling.

Can You Fit Larger Tyres on a Kia Tasman?

Larger tyres are popular modifications among Australian ute owners.

Possible motivations include improving off-road traction, increasing ground clearance and achieving a more aggressive appearance.

However, not every larger tyre will fit every Tasman variant without modification.

Important Considerations Before Upsizing Tyres

Increasing tyre diameter can affect:

  • Speedometer and odometer accuracy.
  • Effective gearing and acceleration.
  • Fuel consumption.
  • Braking performance.
  • Clearance at full steering lock.
  • Suspension articulation.
  • Electronic stability and traction control behaviour.
  • Compliance with state and territory regulations.

For example, moving from 265/65 R17 to 265/70 R17 increases nominal tyre diameter by approximately 3.4%.

That difference is significant enough to warrant checking clearance, calibration and legal requirements.

The fact that the X-Pro uses a larger factory tyre does not automatically mean the same tyre will be approved or fit without issues on an S or SX.

Its suspension and associated components may differ.

Best Kia Tasman Wheel Size for Australian Driving Conditions

Australia presents a wide variety of driving environments, from urban motorways to remote unsealed tracks.

The best wheel size ultimately depends on where and how you drive.

City and Highway Driving

For drivers spending most of their time in cities such as Sydney, Melbourne, Brisbane or Perth, the factory 18-inch wheels on the SX+ and X-Line are appealing options.

They provide a modern appearance while maintaining a practical tyre profile.

Rural Roads and Worksites

The 17-inch wheels found on the S and SX are a sensible option for regional travel and commercial use.

Their higher-profile tyres can be beneficial on uneven surfaces, while the S's steel wheels offer a practical solution for demanding workplaces.

Off-Road Adventures

For drivers regularly exploring remote tracks, rocky terrain and challenging gravel roads, the X-Pro's 17-inch wheels with 265/70 R17 all-terrain tyres are particularly appealing.

The larger tyre diameter and taller sidewall suit the X-Pro's off-road-focused design.

Kia Tasman Tyre Pressure and Maintenance

Maintaining correct tyre pressure is just as important as choosing the right wheel size.

Incorrect pressure can affect tyre wear, fuel consumption, vehicle stability and handling.

How to Check the Correct Tyre Pressure

The recommended pressure should be checked on the vehicle's tyre information label, generally located around the driver's door opening.

Pressure requirements may vary depending on the tyre specification and vehicle loading conditions.

When carrying heavy loads or towing, different pressure recommendations may apply.

Always check pressures when the tyres are cold and follow the vehicle manufacturer's instructions.

Does the Kia Tasman Have a Tyre Pressure Monitoring System?

Yes. Australian Kia Tasman variants are equipped with a Tyre Pressure Monitoring System (TPMS).

The system helps drivers identify potentially unsafe tyre pressure conditions.

When replacing wheels, it is important to ensure that any required TPMS components remain compatible with the vehicle.

How Often Should You Inspect the Tyres?

We recommend regularly checking:

  • Tyre pressures.
  • Tread depth.
  • Uneven wear.
  • Sidewall damage.
  • Embedded stones or sharp objects.
  • Wheel nuts and visible wheel damage.

Tyre inspections are especially important after travelling over rocky tracks or poorly maintained roads.

Does the Kia Tasman Have a Full-Size Spare Wheel?

Yes, the Australian Kia Tasman range includes a full-size spare wheel.

The S uses a full-size steel spare, while the SX, SX+, X-Line and X-Pro are specified with full-size alloy spares.

This is particularly useful for Australian drivers who regularly travel long distances or visit remote areas.

A full-size spare can provide greater practicality than a temporary space-saver tyre, provided it meets the appropriate specifications.

However, drivers should still follow the manufacturer's instructions regarding spare-wheel installation, tyre condition and safe driving.

Kia Tasman Wheel Size FAQs

1. What Is the Standard Kia Tasman Wheel Size in Australia?

The Kia Tasman comes with either 17-inch or 18-inch wheels. The S, SX and X-Pro have 17-inch wheels, while the SX+ and X-Line feature 18-inch alloys. The corresponding original tyre sizes are 265/65 R17, 265/60 R18 and 265/70 R17, depending on the variant.

2. What Size Wheels Does the Kia Tasman X-Pro Have?

The Kia Tasman X-Pro has 17-inch black alloy wheels with 265/70 R17 all-terrain tyres. This combination provides a taller tyre sidewall and larger overall diameter than the standard 18-inch setup fitted to the X-Line.

3. What Is the Kia Tasman Wheel Bolt Pattern?

Aftermarket wheel fitment information commonly identifies the Kia Tasman bolt pattern as 6×139.7 mm. Buyers should also verify the centre bore, offset, wheel load rating, stud specifications and brake clearance before purchasing aftermarket wheels.

4. Can You Put 18-Inch Wheels on a Kia Tasman S?

An 18-inch conversion may be possible if the selected wheels and tyres are compatible with the vehicle's mounting specifications, brake system, load requirements and legal limits. The factory SX+ and X-Line configurations provide useful reference points, but their existence does not guarantee approval for every Tasman S conversion.

5. Are 17-Inch or 18-Inch Wheels Better for the Kia Tasman?

For frequent off-road driving, 17-inch wheels combined with suitable higher-profile tyres are generally advantageous. For everyday road use and buyers prioritising appearance, 18-inch wheels can be an excellent option. The best choice depends on driving conditions, tyre selection and personal preferences.

Conclusion: Which Kia Tasman Wheel Size Is Best?

The Kia Tasman wheel size in Australia ranges from 17 to 18 inches, with each configuration designed for a slightly different type of buyer.

The S and SX use practical 17-inch wheels with 265/65 R17 tyres, making them suitable for everyday work duties and mixed driving conditions.

The SX+ and X-Line upgrade to 18-inch alloy wheels with 265/60 R18 tyres, providing a more refined appearance without significantly changing overall tyre diameter.

Meanwhile, the X-Pro stands apart with 17-inch black alloy wheels and larger 265/70 R17 all-terrain tyres, supporting its more serious off-road ambitions.

For most drivers, we would recommend keeping the original wheel diameter and choosing quality replacement tyres suited to the way the vehicle is used.

If modifications are planned, correct fitment, load ratings, clearance and legal compliance should always come first.

Ultimately, whether you prefer the practicality of 17-inch wheels or the appearance of 18-inch alloys, the Kia Tasman offers wheel and tyre combinations suited to a wide range of Australian driving conditions.

This content may interest you!Kia Tasman Models Australia 2026: Complete Guide to All Variants and DifferencesKia Tasman Models Australia 2026: Complete Guide to All Variants and Differences

Leave a Reply

Your email address will not be published. Required fields are marked *

Your score: Useful

Go up